Silver Vendor
- Messages
- 2,891
- Reactions
- 7,945
I can send 25-06, 30-30 and 7mm Mauser
Let me know
Let me know
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Thanks, I do appreciate your generosity.Finally got some stuff together for you, dropping in the mail this afternoon. I ended up loading a fmj as well as a 700gr in 500 S&W, a fmj in 50 Beowulf, and a fmjhp in 460 S&W. Good luck with your project, enjoy watching it come together.
Oh Cool, instructions!!!@Caveman Jim
I've got this ready for your display. I'll have it shipped out next week. Looking forward to seeing the finished project!
View attachment 1372674
I remember trying to match bullets with cases and the rest is blurry. I don't have many dies for seating so have utilized an unorthodox method to seat. I may have needed 2 of those but cannot remember.I did send you a 195 grain 8mm bullet and a 100 grain 6mm bullet. Curious now what you used them for instead…
View attachment 1388026
I love my two granddaughters very much but I've been trapped with them for almost 11 days and may be a dozen more. Humor has flown so close over my head I feel jet lag on a regular basis.Hope you didn't think I was being serious…tried adding some humor.
I'm not afraid, I'm geared up.With all these random people sending you single bullets, the x-ray guy at the post office sorting facility probably thinks you're on every mafia hit list.
I think that would work out very well. Or, you could pull all the bullets, and screw down from the inside of the case, then reseat the bullets. Really shouldn't be much work at allI've been doing some research in the shell retention area so they stay put. I am thinking magnets will do the job nicely.
I can JB Weld them into the primer pocket and on the shelf I can drill an undersized hole with a bradpoint bit and force it in there for tension.
What do y'all think of the idea?
4mm x 1.5mm N42 Strong Litte Round Magnets Disc NdFeB Rare Earth Magnets Nickel Plated Neodymium Magnets Amazon
Model ID D-04-1.5-N Material NdFeB, Grade N42 Shape Disc / Circular / Round Diameter 4 mm Height 1.5 mm Tolerance +/- 0.05 mm Coating Nickel-plated (Ni-Cu-Ni) Magnetisation Axial (Poles on Flat Ends) Strength aprox. 350g Max. working temperature 80°C Weight(1 piece) 0.19 gwww.umagnets.com
Yeah right… I'm takin the low road on this one. There's no way I am gonna pull and reseat all of these, no way, ain't happenin…I think that would work out very well. Or, you could pull all the bullets, and screw down from the inside of the case, then reseat the bullets. Really shouldn't be much work at all