- Messages
- 6,244
- Reactions
- 7,103
I take full credit for the success of this mission!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I think it was on the high road where some dude stuck a bunch of stuff in his rifle barrel.. a bullet, a cleaning rod, some sticks, some broken drill bits. It was epic and very entertaining.. went to like 60 pages.I take full credit for the success of this mission!
I have a Savage bolt action .17HMR that has a bullet stuck in the throat, and 3 pieces of broken off coat hanger down the bore and then a wooden dowel jammed down on top of it all...Just wait till I post pics..
DO IT! That'd be some of the best stuff ever. But that'd probably be like a full time job just in the tellings..5 pages for a small roll pin in a bolt catch..
I'm going to start posting some of my projects!
I have a Savage bolt action .17HMR that has a bullet stuck in the throat, and 3 pieces of broken off coat hanger down the bore and then a wooden dowel jammed down on top of it all...Just wait till I post pics..
Always use the right tool.. and that tool is Velzey! lolChit Velzey....isn't that job security for (from) the idiots. Re Think man..rethink...lol
If it wasn't for us bubba's and kitchen tables, you would have a lot less work.
I had to use a heat gun to remove the scope mounting screws from the top of my Bushmaster receiver. I think the Loc-Tite had to get to somewhere above 300 degrees and melt before the screws would come loose. The finish stood up perfectly.Wouldn't that possible run the risk of damaging the finish?
I had a squib stuck half way down the 4.5" barrel on my 1903 Colt .32 pocket model. I removed the barrel, got a 6" piece of .25" brass rod and stuck it in the muzzle end, padded the breech end with a square of .25" thick leather, chucked the whole thing into a machinist vise, and started to squeeze down on it. Pushed the stuck bullet right out the breech end with no damage and very little effort.5 pages for a small roll pin in a bolt catch..
I'm going to start posting some of my projects!
I have a Savage bolt action .17HMR that has a bullet stuck in the throat, and 3 pieces of broken off coat hanger down the bore and then a wooden dowel jammed down on top of it all...Just wait till I post pics..