Gold Supporter
- Messages
- 24,553
- Reactions
- 37,239
I am thinking about ordering a $70 stainless steel 16" 7.62x39 barrel for an AR15 bench set up. Normally I would go longer for a bench rifle upper but the selection for inexpensive 7.62x39 barrels longer than 16-18 inches is very limited.
This guy tested some factory steel cased rounds out of a test barrel beginning at 24" of length and cut it down to 16.5". He only found about 100fps difference. Would those velocity spreads be much different with slower powder?
Is a 1:10 twist suitable for 150gr projectiles.
This guy tested some factory steel cased rounds out of a test barrel beginning at 24" of length and cut it down to 16.5". He only found about 100fps difference. Would those velocity spreads be much different with slower powder?
7.62×39 mm Russian: Effect of barrel length on muzzle velocity
In this post, Rifleshooter.com will be testing the effects of barrel length on velocity for the 7.62×39 mm Russian Cartridge. Chambered in the SKS and AK-47, the 7.62×39 mm Russian cartri…
rifleshooter.com
Is a 1:10 twist suitable for 150gr projectiles.