- Messages
- 1,678
- Reactions
- 3,262
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This is likely the issue.Bear Creek Arsenal
No gas tube or gas key so that's not it. It's got lots of lube, could need to be broken in. How could I tell if it's the extractor or locking lugs? I am using Wolf Ammo, it's what I could find.You could try polishing the chamber with some Flitz after ruling out everything else first and don't overdo it. If that doesn't work it will cost more to fix it than to get another Bear Crap Arsenal Barrel.
List of other potential problems that could cause this.
Misaligned gas tube,
Out of spec gas key, (had this happened with a factory-built AA grendle)
Out of spec. extractor,
Lube and break-in time
Mis aligned locking lugs (factory problem)
Headspace (Factory problem)
Wolf Ammo
Yes, both type 2. The brass doesn't seem to have any major scratches on it. I cycled through 30 rounds and it's either getting better or I'm getting used to it so it might work its self out.they both are type 2 correct?
It's totally fine without a cartridge, goes into and out of battery smoothly.with the upper off and manually inserting the BCG over and over with no ammo is it sliding in and out ok do you feel any kind of binds?