Win Model 88. Won't eject...

Discussion in 'Maintenance & Gunsmithing' started by daiello91, Sep 17, 2011.

  1. daiello91

    daiello91
    NW Oregon
    Active Member

    Messages:
    341
    Likes Received:
    37
    I have a Winchester model 88 lever action that won't eject a spent shell (yes I'm positive it's a spent round). The action won't open. Anyone know if this is a common issue, or suggestions on where to take it if it's a major issue?

    Thanks
     
  2. deadeye

    deadeye
    Albany,OR.
    Moderator Staff Member

    Messages:
    4,284
    Likes Received:
    2,455
    Sounds like a stuck case if it wont open.
     
  3. nitestocker

    nitestocker
    woodland washington
    Well-Known Member

    Messages:
    1,680
    Likes Received:
    113
    what id try id get a wooden dowel from a hardware store have a friend hold the rifle with a light tension on the lever like you are trying to eject the shell with the dowel in the barrel( lightly) tap the dowel against the empty casing . if it moves pull the dowel out and see if you can eject it out
     
  4. daiello91

    daiello91
    NW Oregon
    Active Member

    Messages:
    341
    Likes Received:
    37
    I used the cleaning rod and that worked. Thanks.
     
  5. nitestocker

    nitestocker
    woodland washington
    Well-Known Member

    Messages:
    1,680
    Likes Received:
    113
    no problem glad i could help
     

Share This Page