Speed Steel at ARPC October 25th 2020, registration is open!

Lesliet

Messages
675
Reactions
1,050
Speed Steel competition at ARPC on the 25th of October ( Sunday) is open for registration on Practiscore!

Home | PractiScore

it's $10, pay at the match. If you sign up, make sure you squad yourself, and hit "save" at the bottom, gotta make sure you're squadded before registration closes.

If you haven't shot this match before, it's a great intro to competition. 5 steel plates in various configurations, get hits on them as fast as you can, and your time is your score. 5 runs on each stage, worst run gets thrown out.
You can shoot this with a .22 lr pistol, .22 lr rifle, pistol caliber carbine ( generally defined as being a carbine that uses standard straight walled cartridges like 9mm, .45 acp, .40, etc. ) or a pistol or revolver. If you're shooting a handgun in .22lr, you don't need a holster, just a case for the gun so you can bring it to the firing line safely. It's nice to have 5 magazines, but people can load for you if you don't have quite enough.
 
OP
Lesliet

Lesliet

Messages
675
Reactions
1,050
Registration seemed to work ok for me, once the squadding thing got worked out. If you have any issues, Travis' email is on there. You should be able to bring up Practiscore, and look at the match, and see yourself on a squad. If you can see that, you're good to go.

Looking forward to this, I'm planning to try out a new design of moonclip holder; shooting revolver this time.
 
OP
Lesliet

Lesliet

Messages
675
Reactions
1,050
Spent all week casting, coating and sizing bullets... Got to ladder test the new load, today, and it is rather nice! Loaded up a few hundred, and put it all in the clips, should be all set for tomorrow.

Best of luck, everyone, and see you all in the bright and early!
 
Not a fan of the Halloween plates. Having said that, I do enjoy the constant variety that Ramiro and team come up with from month to month. I was hoping to do a little better than I did, with .22 pistol (RFPO). Gotta bring your A game when you’re shooting in the same division as @NWGlockgal.

Considering how much trouble the odd shaped plates were giving me, I managed to do extremely well in RFRO. Overall, the day turned out pretty nice. Actually peeled of my jacket for a few stages. That sun sure felt good! :)
 
OP
Lesliet

Lesliet

Messages
675
Reactions
1,050
Having committed to running only the revolver until next October, it feels almost like starting over. My times were reminiscent of 2 years ago, when I first started shooting in competitions with the .22 pistol. Gonna have to brainstorm a bit and come up with training ideas to 1. get more accurate, 2. develop a faster reload, and 3. get smoother and faster, overall. The next Speed Steel in November will likely be my only match that month, as my current plan is to back way off on matches through the winter, and work on equipment and training.
 

NWGlockgal

Messages
2,460
Reactions
6,835
Not a fan of the Halloween plates. Having said that, I do enjoy the constant variety that Ramiro and team come up with from month to month. I was hoping to do a little better than I did, with .22 pistol (RFPO). Gotta bring your A game when you’re shooting in the same division as @NWGlockgal.

Considering how much trouble the odd shaped plates were giving me, I managed to do extremely well in RFRO. Overall, the day turned out pretty nice. Actually peeled of my jacket for a few stages. That sun sure felt good! :)
I liked the Halloween plates, but they sure made it challenging. I think that was the fastest match ever, low turn out. I didn't see you guys there, I thought you decided to stay home and stay warm! Great job with the rifle!
 
I liked the Halloween plates, but they sure made it challenging. I think that was the fastest match ever, low turn out. I didn't see you guys there, I thought you decided to stay home and stay warm! Great job with the rifle!
The other two were cold and hiding out in the car! We did catch a glimpse of you as we were headed to our starting bay though.
 
OP
Lesliet

Lesliet

Messages
675
Reactions
1,050
IF we become 'more accurate' WHY would we need to proceed to #2?
Always best to have a "plan "B" " in case things don't go smoothly. Also, Speed Steel isn't the only competition I shoot... USPSA and the monthly benefit steel match at Izaak Walton are both guaranteed to require reloads. The last match I shot with the EPS folks, there was a stage called " the Sea of Steel"... 25 falling steel targets. My p320 mags for that day held 21. With a sixgun, that stage might take a little while.
 

UPCOMING EVENTS

Lead Farm Precision Rifle Match
The Lead Farm
34006 Gwinn Rd, Prosser, WA 99350, USA
Arms Collectors of SW Washington Gun Show
Battleground Community Center
912 E Main St, Battle Ground, WA 98604, USA
Rimfire Challenge Dec 12th @ DRRC
Douglas Ridge Rifle Club
27787 OR-224, Eagle Creek, OR 97022, USA
Albany Rifle & Pistol Club (ARPC) Gun Show
Linn County Expo Center
3700 Knox Butte Rd E, Albany, OR 97322, USA

LATEST RESOURCE REVIEWS

  • Gun Pro Shooting Supplies
    5.00 star(s)
    Great Little Shop!
    I went in the place several weeks ago while visiting my kid at school. I ended up buying a new set of electronic ear muffs as my old ones were...
  • Gun Pro Shooting Supplies
    5.00 star(s)
    My go-to
    Neil has been nothing but professional, helpful and fair since I was a brand new shooter. He and his staff treat everyone with respect and you...
  • Northwest Armory - Tigard
    1.00 star(s)
    Completely unhappy!
    Not happy, customer service is highly lacking, and the male employees are rude. We wont be back!!
  • Wildcat Mountain
    4.00 star(s)
    Wildcat Mountain Nov. 30
    Went there today, it was accessible but bad conditions which I kind of expected. Melting snow, mud, etc. No one there and I didn't see a lot of...
  • Gator's Custom Guns
    5.00 star(s)
    Best true Gun shop ive been in for some time
    Cool stuff in stock rather than the top 10 at corporate box stores They moved to a larger place I have to go back and spend more money. I like to...
Top Bottom