Romanian Tokarev slide disssassembly

Discussion in 'Maintenance & Gunsmithing' started by Blitzkrieg, Jul 2, 2013.

  1. Blitzkrieg

    Blitzkrieg
    WA
    Well-Known Member

    Messages:
    9,674
    Likes Received:
    4,876
    I don't want to hammer any harder on the vertical extractor retention pin without expert advice (I assume it goes out the top?) and what the heck is the flat head slotted horizontal screw for? It does not unscrew but it Turns?

    Have a Wolff spring kit and trying to swap the springs out. Recoil and mag springs were easy of course
     
  2. taylor

    taylor
    Willamette Valley
    Well-Known Member

    Messages:
    1,135
    Likes Received:
    152
    Its not a screw its a slotted pin. There is a VERY good video on Youtube that covers the complete disassembly and re assembly of Tokarev type pistols. Its hard to find as its listed as " Type 54 disassembly" and the 2nd part is "Type 54 re-assembly". Its for a Chinese model but exactly the same as a Romanian. This is the only full take down video I've seen for the Tok and its helped me a lot.
     
  3. Blitzkrieg

    Blitzkrieg
    WA
    Well-Known Member

    Messages:
    9,674
    Likes Received:
    4,876
    I did the youtube thing but nothing covered this.. I'll try a search with those words, thanks
     
  4. taylor

    taylor
    Willamette Valley
    Well-Known Member

    Messages:
    1,135
    Likes Received:
    152
    The videos are in 3 parts and the poster is Brent Nowell if that helps.
     
  5. Blitzkrieg

    Blitzkrieg
    WA
    Well-Known Member

    Messages:
    9,674
    Likes Received:
    4,876
    Type 54 Disassembly - YouTube

    That one video did it.. several split retention pins to deal with.. but the extractor pin won't come out and I don't want to bash it harder.. may be rusted in place judging from the look of the firing pin.. to a smith I guess, after that it should come out OK
     

Share This Page