Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
If the metal underneath is aluminum a brass brush wheel will damage it.I haven't tried contacting Tasco, but it's worth a shot.
Any chance that the brass wheel/brush would damage the metal underneath? I've not used one of those on a product like this before.
Kroil is the absolute best penetrating oil there is. We used it extensively in power plant maintenance. Our machinists used it on the nuts on 2" (thread diameter) turbine casing nuts where even a slugging wrench and a sledge hammer wouldn't move them. If you see something called Aero-Kroil that's just regular Kroil in a spray can. I will never be without some Kroil in my shop.Regardless of whether Kroil works to remove rubber it is something well worth adding to any metal or gun smiths box of tricks.
Kroil is better.Where do you get that Kroil? I have never heard of it or seen it any where. I have had good luck with PB Blaster and Zep 45 for rust busting and penatrating, IF there is something better then those I would love to try it!
No, no no!!! Absolutely not! Way too dangerous! I've never permitted open gasoline in my shop after we lost a whole racing shop and two race cars, and nearly a crew member because of it.gasoline?
As with gasoline, be VERY careful with lacquer thinner.lacquer thinner
Tasco world class put a nice rubber coating on a few of their scope a number of years ago.. Yep it started breaking down after awhile. Lacquer thinner takes the coating right off...
As with gasoline, be VERY careful with lacquer thinner.