Race Gun Upgrades

fxdc · Jan 22, 2018

Well all arrived...

Trigger is better than the Apex Gen 1 FSS
Trigger breaks at 1lb 12ozs. And No Issues.

Got lucky with the COMP and it clocked perfect with .002 clearance between it and the slide.

Alpha X holster is fantastic... I ran a Hogue
POWER Speed and it was not able to get it adjusted to the frame and had some scary draws.
So took the plunge with the newest that Double Alpha offered. Fast and SECURE!
can lock if needed also

Now it's on to load development for the 11 port compensator. Time to bust out the chrono.

It gonna be HS-6 and some where between 7.9 and 8.6 for a 124gr bullet
And possible 9.6 with a 115gr.

Will update in the reloading section.

fxdc · Feb 3, 2018

Moving my delta to the frame mount, Dang guess I'm committed NOW.
LOL

fxdc · Feb 3, 2018

Test fit looks good..... need this wrapped up ASAP. Bushing install and it's
Done.
So I can get the EDM SET up to do these cuts....

FORGOT TO ATTACH THE TEST FIT PIC...

bbbass · Feb 3, 2018

I used to run a Gun Bucket Holster. Talk about scary. I had it set wide and my Para would just sit there on the muzzle cone. Could not pass the rollover test but nobody ever checked.

fxdc · Feb 3, 2018

bbbass said:
I used to run a Gun Bucket Holster. Talk about scary. I had it set wide and my Para would just sit there on the muzzle cone. Could not pass the rollover test but nobody ever checked.

Yup
The RO noticed mine.....
Never got DQd though.

EPS · Feb 3, 2018

fxdc said:
Test fit looks good..... need this wrapped up ASAP. Bushing install and it's
Done.
So I can get the EDM SET up to do these cuts....View attachment 427365FORGOT TO ATTACH THE TEST FIT PIC...View attachment 427384

This might sound like a stupid question to some .but when you cut the slide down like that it makes it lighter do you change the recoil spring to a light one or heavy one

EPS · Feb 3, 2018

Don't have to worry about me completing against you I'm thinking of cutting the slide on my Glock just wanted to know if I go heavy spring or lighter spring after the cut

fxdc · Feb 4, 2018

I Will let you know what the slugs weigh in at.
Not sure of spring weight, may not change at all.

fxdc · Feb 6, 2018

The slide is .5oz lighter now.

fxdc · Feb 8, 2018

Installed a stage 4 kit on my race gun.... LOL
Stole the tach cover off my bike
It will do untill I get a real one .
I'm really digging the larger window of the C more.

Now I can at least get both sights on to paper.and then start playing with getting a major 9 load that works. Then dial the glass into that.