JavaScript is disabled
Our website requires JavaScript to function properly. For a better experience, please enable JavaScript in your browser settings before proceeding.
Skilsaw 10" table saw.

I want to pay this forward to someone that needs it.
It is about 20 years old.
It has never been stored outside or even used outside. Always garaged.
It is not a whizbang super duper table saw but it works just fine.
It is direct drive. Somewhere along the line the blade guard has vanished
but I have the miter gauge and the rip fence that goes with it.
A new blade would be appropriate.
I am giving it away because it has served it's purpose for me 10 times over
and it would be nice if someone here can use it.
We will be moving in the spring and it would be best if we didn't have to ship this with us.
That and the fact that my construction/handyman days are way behind me.
We live 4 miles east of I-5 at exit 88 which is the Grand Mound/Rochester exit.
You pick up.

Have a good day,

Larry

View attachment 622881
View attachment 622882
View attachment 622883

Wow that is supper nice of you. Someone will be very happy!!:):)
 
Hello:
If this is still available id be grateful and happy to pick it up. :)
Head Shot

Hi Head Shot,

You are more than welcome to the saw.
Just want it to go to someone that can use it.

I sent you a PM with my contact info so we can set up a
time for you to pick it up.

Have a good day,

Larry

If you still live in Iowa that's going to be a long commute...........o_O
 
GONE!

I have a couple of beater air soft rifles. The SCAR is functional, the barrel needs tightening. The AR has a broken charging handle which makes it inoperable, but the internals are good for parts etc.

20191017_140447.jpg
 
Last Edited:
.243 Cases free to a good home.

8 RP, appear to have original primers so call them once fired?
3 W-W Super, appear to be reloaded at least once since they have non-factory primers.

I'm not sure how these got into my stash, but they might as well go to someone who can use them. 20191018_103917.jpg
 
Last Edited:
.303 British Loads

I got these in a large box of estate sale reloading gear many years ago. I've held onto them thinking I'd get a SMLE one day … but that has yet to happen. So I should get these out to someone who can use them (knowing quite well that within a week of letting them go I'll find a killer deal on a rifle … )

12 appear to be original factory Core-Lokt loads. Three are definitely reloads so I'd only use them for components.

Face-to-face only please, I don't want to deal with shipping ammo.

BTW they have spent the last couple of decades in a sealed ammo can with dissicant packs. Other ammo I've pulled and used from this estate sale have all functioned perfectly. But, you still may want to use all of them for components only.


20191018_104110.jpg



20191018_104038.jpg
 
Last Edited:
Hello:
Upon several attempts to call I have failed to get in contact with original postee on getting the table saw.
So if someone else is interested in attempting contact to get it its up for grabs as ive decided to give up on it.
Thank you
Head Shot


Well, I have no idea what to say to that.
I have had no phone calls or missed phone calls,
emails or responding PM's regarding the saw.
Both my phone number and email address were in the PM's I posted.
I just took the PM's down and then I stumbled on to this post.
 
Last Edited:
I've had this brass in odd ball calibers for a while and they have not sold, so just to clear up clutter in my brass for sale tub they are FREE (will ship on your dime).

18) 357 Rem Max FREE
5 are annealed and necked down to .30 Tumbled

14) PPU 8mm Mauser. Boxer primed tumbled FREE

16) 45 Colt tumbled FREE

GONE!!!
 
Last Edited:
@Kimber Custom (of Rimfire Challenge and Appleseed fame) was kind enough to gift me a cut down 10/22 stock so that I could get my young daughter shooting Rimfire Challenge. She has since grown a bit and graduated to an adjustable stock and an upgraded rifle so this stock is now lonely and looking for a new master! Let's get some more young shooters in the game, Lord knows the shooting fraternity is getting rather grey in this country!

The stock has been cut down approximately 2.75 inches in a nice curve that should fit the factory butt plate just fine (I used a thin slip on pad so I don't know for sure).

Let me know if you can use it and we will figure out how to connect.


10-22 Stock.jpg
 
Last Edited:
I've had this brass in odd ball calibers for a while and they have not sold, so just to clear up clutter in my brass for sale tub they are FREE (will ship on your dime).

18) 357 Rem Max FREE
5 are annealed and necked down to .30 Tumbled

14) PPU 8mm Mauser. Boxer primed tumbled FREE

16) 45 Colt tumbled FREE

Tentatively gone. ;)
I would love love love the 45 colt!
 

Upcoming Events

Tillamook Gun & Knife Show
Tillamook, OR
"The Original" Kalispell Gun Show
Kalispell, MT
Teen Rifle 1 Class
Springfield, OR
Kids Firearm Safety 2 Class
Springfield, OR

New Resource Reviews

New Classified Ads

Back Top