Mounting plate/Adapter plate Trijicon RMR/Elcan Specter DR???

svxr8dr

Messages
611
Reactions
369
Trying to find a way to attach a Trijicon RMR RM06 to the top of a Elcan SpecterDR. I have the Elcan MRD plate, but it will not line up properly with the RMR. Is there possibly an adapter made by someone? Or is it time to contact a friend with a CNC?
Here is a pic of the bottom of the RMR
RM06.jpg
Here is what the Elcan MRD mount looks like (different color than what I own is shown for easier contrast.)
elcan-MRD-mount.jpg
Here is the Elcan MRD mount attached to the top of the Elcan SpecterDr. You can see there are 4 small posts (I could remove 2 easily enough.), but the remaining two posts still would not line up right, and same for the screw holes to secure the two together.
MRD.jpg

Just looking at it, I'm starting to lean towards fabricating something.
 

UPCOMING EVENTS

Cerberus Training Group - Skill Builder - Pistol/Rifle Combo
Cerberus Training Group
47 Cattle Dr, Goldendale, WA 98620, USA
Albany Rifle & Pistol Club (ARPC) Gun Show
Linn County Expo Center
3700 Knox Butte Rd E, Albany, OR 97322, USA
Cerberus Training Group - Skill Builder - Pistol/Rifle Combo
Cerberus Training Group
47 Cattle Dr, Goldendale, WA 98620, USA
Arms Collectors of SW Washington Gun Show
Battleground Community Center
912 E Main St, Battle Ground, WA 98604, USA

LATEST RESOURCE REVIEWS

  • J&B Firearm Sales
    5.00 star(s)
    Good local shop
    Picked up a rifle yesterday from J&B. This was the second or third gun purchase over the last few years from them. I always enjoy stopping by...
  • H&K Gun Shop
    5.00 star(s)
    The only place I have found 9mm in stock
    I’ll admit I didn’t even know this place existed, as I don’t tend to go into Forest Grove often. But it’s a giant (looks bigger from the...
  • Revelation Arms
    4.00 star(s)
    Depends who answers the phone
    I was given the number to Roger Loock by Beaver Creek Armory, as I needed parts I had ordered from MCarbo installed on a Kel-Tec Sub2000. On my...
  • Coastal Farm & Ranch - Cornelius
    3.00 star(s)
    Lesson learned
    I’ll take some responsibility here, as I took the employee at their word instead of doing a thorough inspection. Short story is that I asked for a...
  • MK Tactical
    5.00 star(s)
    Good guys!
    I stop in here every once in a while to see what Michael has in the clearance section, and to ask questions when I have a project in mind...
Top Bottom