- Messages
- 621
- Reactions
- 405
Trying to find a way to attach a Trijicon RMR RM06 to the top of a Elcan SpecterDR. I have the Elcan MRD plate, but it will not line up properly with the RMR. Is there possibly an adapter made by someone? Or is it time to contact a friend with a CNC?
Here is a pic of the bottom of the RMR
Here is what the Elcan MRD mount looks like (different color than what I own is shown for easier contrast.)
Here is the Elcan MRD mount attached to the top of the Elcan SpecterDr. You can see there are 4 small posts (I could remove 2 easily enough.), but the remaining two posts still would not line up right, and same for the screw holes to secure the two together.
Just looking at it, I'm starting to lean towards fabricating something.
Here is a pic of the bottom of the RMR
Here is what the Elcan MRD mount looks like (different color than what I own is shown for easier contrast.)
Here is the Elcan MRD mount attached to the top of the Elcan SpecterDr. You can see there are 4 small posts (I could remove 2 easily enough.), but the remaining two posts still would not line up right, and same for the screw holes to secure the two together.
Just looking at it, I'm starting to lean towards fabricating something.
