- Messages
- 62
- Reactions
- 28
I have my first kid on the way and medical school application is expensive. Since I don't really have the time to reload anymore, I am posting all my gear up here to see if anyone is interested. I'd much rather deal with someone local before I move it to AR15.com or something.
I live in the Gresham area and would rather have someone who could stop by locally for a pickup.
I've had it for about 4 years and have probably only pushed 1000 rds at most through it, mostly .223. I've only modified one thing on it: the spring for the rotating shell plate holder has been cut a little to eliminate the sudden jump of shells when it stops abruptly after cycling, it works a lot smoother this way.
I can swap out the XL650 with either .223, .45, or .308 kit installed.
Dillon XL 650 with .223 kit installed $500 sold
XL650 Quickchange Kit $100 sold
Dillon Superswage $90 sold
Dillon Eliminator scale) $50 sold
Ramshot TAC 2x half full bottles $20
Hodgdon Titegroup almost full $15 sold
Lapua .308 Brass 100 (new) $70 sold
Hornady Amax 168gr BT (new) $25 sold
berger 80gr vld .223 (new) $20 sold
$40 bucks for all the primers
sold
RCBS 3-DIE CARB TC SET .45 AUTO 18915 $50
Dillon .223 Carbide Die set $150 sold
RCBS GMM 2-Die 308 Winchester (brand new) $125
Lee factory crimp .308 (brand new) $10
XL 650 Conversion Kit $70 ea
Hornady XTP .45 Hollow points about 70 rounds in each grain size
185gr $10
200gr $10
230gr $10
I'll give whoever buys these all the .45 casingssold
100 new remington .223 brass + 100 once fired PPU 5.56 brass (deprimed/sized, swaged and tumbled). Will throw in some leftover (about 15) SMK's HPBT 77gr's. All for $35. sold
Lee zip trim and tools (gone)
wilson 45 acp casegage $10
lyman .223 case gage $10
rcbs primer tray $2
rcbs lube pad $5
rcbs bullet puller $15
hornady powder trickler $10
frankfurt arsenal caliper $20
Berry MFG 400 tumbler $40
I live in the Gresham area and would rather have someone who could stop by locally for a pickup.
I've had it for about 4 years and have probably only pushed 1000 rds at most through it, mostly .223. I've only modified one thing on it: the spring for the rotating shell plate holder has been cut a little to eliminate the sudden jump of shells when it stops abruptly after cycling, it works a lot smoother this way.
I can swap out the XL650 with either .223, .45, or .308 kit installed.
Ramshot TAC 2x half full bottles $20
- CCI #300 LP (1000)
- CCI #400 SR (300
- winchester primers
- SP (200)
- LP (400)
RCBS 3-DIE CARB TC SET .45 AUTO 18915 $50
RCBS GMM 2-Die 308 Winchester (brand new) $125
Lee factory crimp .308 (brand new) $10
XL 650 Conversion Kit $70 ea
- .45 ACP
.308 Winchestersold
185gr $10
200gr $10
230gr $10
I'll give whoever buys these all the .45 casings
rcbs primer tray $2
rcbs lube pad $5
rcbs bullet puller $15
hornady powder trickler $10
frankfurt arsenal caliper $20
Berry MFG 400 tumbler $40