- Messages
- 102
- Reactions
- 33
The local Bi-Mart carries the Hornady Lock-N-Load Classic and the <broken link removed> . Both are about $300. The Hornady has a rebate for 500 bullets.
Side-by-side, the LNLC (left) and the RCSMK (right) come with:
Lock-N-Load Powder Measure | Uniflow Powder Measure
Electronic Scale | 5-0-5 Mechanical Scale
The 7th Edition Hornady Handbook of Cartridge Reloading | Speer Reloading Manual
Three Lock-N-Load Die Bushings | -
(already have) | Case Lube Pad
One Shot Case Lube | Case Lube-2
Primer Catcher | -
Positive Priming System | -
Hand-Held Priming Tool | Hand Priming Tool
- | Case Neck Brushes
Universal Reloading Block | Case Loading Block
(funnel pictured) | Powder Funnel
Chamfering and Deburring Tool | Debur tool
(already have) | Hex Wrench Set
Primer Turning Plate | (already have)
500 Bullet Rebate | -
They're pretty close on accessories, so i guess it's a matter of the presses themselves. If you had to tool up from nothing, which would you get? I'll take advice on other models, too, but these are conveniently local.
Side-by-side, the LNLC (left) and the RCSMK (right) come with:
Lock-N-Load Powder Measure | Uniflow Powder Measure
Electronic Scale | 5-0-5 Mechanical Scale
The 7th Edition Hornady Handbook of Cartridge Reloading | Speer Reloading Manual
Three Lock-N-Load Die Bushings | -
(already have) | Case Lube Pad
One Shot Case Lube | Case Lube-2
Primer Catcher | -
Positive Priming System | -
Hand-Held Priming Tool | Hand Priming Tool
- | Case Neck Brushes
Universal Reloading Block | Case Loading Block
(funnel pictured) | Powder Funnel
Chamfering and Deburring Tool | Debur tool
(already have) | Hex Wrench Set
Primer Turning Plate | (already have)
500 Bullet Rebate | -
They're pretty close on accessories, so i guess it's a matter of the presses themselves. If you had to tool up from nothing, which would you get? I'll take advice on other models, too, but these are conveniently local.