Gold Lifetime
Silver Lifetime
Bronze Lifetime
Bronze Supporter
- Messages
- 5,669
- Reactions
- 8,091
Okay. I'll get that then.....
14 inches is a medium tree trunk!
Thanks.

Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Okay. I'll get that then.....

You and I have had totally different experiences. I have found the electric saw to be much safer than gas. When I was younger and tired and not giving my gas saw 100% attention, I put a 3/8" dado groove in my shinbone. I have a nice scar for my effort and my left leg is noticeably larger in the calf area behind the scar 40+ years later. The electric saw has that double tirgger/button system and as well as the kickback bar/chain brake like the gas saw. It is also a lot weaker than my gas saw. Doesn't take much pinch to stop the chain from turning. Then you have to release the button and the trigger to start over.But that sucker nearly took out my knee when I was tired and not giving it 100% of the attention it deserved. Lesson learned and I have a new pair of saw chaps thanks to it. I took those chaps and tested them with my other saws and again with the electrics.
I love the Fiskar loppers. I have cut thousands of branches with them and they keep on lopping.Got the blades. Oh man I'm so excited to get my house done. My neighbor is gonna help me. Actually I have alot of gardening equipments.
I have a extendable Fiskar and a 17 inch prener that I use previously cutting those tree branches, But the saw is manual. But it can cut really good.
View attachment 2306788
Oh yes. Pretty much anything Fiskar does is innovative. I gave my friend a fillet knife and he loves it.I love the Fiskar loppers. I have cut thousands of branches with them and they keep on lopping.
I have both of those Fiskar products you have pictured in post #82. They replaced vastly inferior predecessors from other companies.Oh yes. Pretty much anything Fiskar does is innovative. I gave my friend a fillet knife and he loves it.
It all depends on what you're doing. The time the Dewalt bit me, I was limbing a bunch of trees I had felled. I typically use the Husky 572 with a 32" bar since I can run it standing up and not kill my back, as well as keep the spinny, bitey part away from me. I ran out of gas and just had a dozen or so limbs to finish up, so I grabbed the Dewalt and through some circumstance, was in an awkward position and just let it slip through a branch and it kissed my knee. Went though the chaps, ripstop pants and some skin before I let go and dropped it. Luckily no serious damage.You and I have had totally different experiences. I have found the electric saw to be much safer than gas. When I was younger and tired and not giving my gas saw 100% attention, I put a 3/8" dado groove in my shinbone. I have a nice scar for my effort and my left leg is noticeably larger in the calf are behind the scar 40+ years later. The electric saw has that double tirgger/button system and as well as the kickback bar/chain brake like the gas saw. It is also a lot weaker than my gas saw. Doesn't take much pinch to stop the chain from turning. Then you have to release the button and the trigger to start over.
I've never worn chaps, just denim jeans.
I have one of their pruning saws, and a couple of their axes. They have all been great.Oh yes. Pretty much anything Fiskar does is innovative. I gave my friend a fillet knife and he loves it.
Agreed. It is even a bit awkward. It may be safer for a novice though. Maybe...I also hate the stupid safety on the electrics.
I was stunned when that Dewalt cut right through them. I thought they were defective, so I ran all my saws through them to see what would happen. Nope, they worked as designed on the gas saws and both battery saws went right through.Now you've got me wondering about chaps.
It was a primary factor for mine. Being tired and rushing to 'finish the job' got me. I know better, but did it anyway.I think the "less than 100% attention" was probably the bigger factor for both of us, gas or electric.
Don't worry I'm big in electronics. If I get a vacuum tube TV, I'll give it to you as a present.. On the House!I also hate the stupid safety on the electrics. ....


My technique for limbing involves keeping the saw on the opposite side of the trunk. When limbs stick up or down, I am standing further away, so the saw has room to lose momentum before it gets near my legs.Agreed. It is even a bit awkward. It may be safer for a novice though. Maybe...
I think the "less than 100% attention" was probably the bigger factor for both of us, gas or electric. I tend to use the electric for pretty small stuff and haven't had any close calls. Your post certainly influences me to pay attention even if it seems safer to me.
While I was at the doctor's office for a follow-up visit after getting my leg sewn up, I ran into a former high school classmate. When I told him what I was there for, he showed me the nasty scar he had on his knee from a couple of years before. Gas or electric - those things are dangerous!
Now you've got me wondering about chaps.
Now you tell me.My technique for limbing involves keeping the saw on the opposite side of the trunk. When limbs stick up or down, I am standing further away, so the saw has room to lose momentum before it gets near my legs.

Ditto. Only mine is a cordless Milwaukee.When I'm not using it to cut cats out of cars in the 'hood, I use my DeWalt sawzall with a demo blade to trim anything below 4" diameter. I especially like how I don't need to concern myself with whether or not there's dirt or nails. I recently removed a tree, and sawzall'd the roots as they lay in the dirt.
