Completely new territory for me and there doesn't seem to be a lot of previous info posted on the forum. I would be interested in any insights, quirks, tips & tricks, or performance suggestions anyone might have. OR, simply sharing your own builds.
I purchased a pre-assembled upper, on a whim. Prior to that, I've never owned or shot one (AR version), haven't done any previous research on them and quite frankly, has never even been on my radar before.
I'm aware of the firing pin issue and have an enhanced on order. From my limited, impromtu, research I decided to start with a few C-product mags (couple 10rd and some 30's). Finding any mags wasn't easy and they aren't exactly "cheap". I've also seen a bit about possible mag mod's. I was thinking of going with an H3 buffer.
@dinky450 has been incredibly helpful getting me up to speed a bit, but thought I would open it up and tap into the general wealth of knowledge pool around here.
Also, if anyone might have a spec sheet on the 7.62x39 bolt and/or chamber, that would be most appreciated.
And.... GO!!
I purchased a pre-assembled upper, on a whim. Prior to that, I've never owned or shot one (AR version), haven't done any previous research on them and quite frankly, has never even been on my radar before.
I'm aware of the firing pin issue and have an enhanced on order. From my limited, impromtu, research I decided to start with a few C-product mags (couple 10rd and some 30's). Finding any mags wasn't easy and they aren't exactly "cheap". I've also seen a bit about possible mag mod's. I was thinking of going with an H3 buffer.
@dinky450 has been incredibly helpful getting me up to speed a bit, but thought I would open it up and tap into the general wealth of knowledge pool around here.
Also, if anyone might have a spec sheet on the 7.62x39 bolt and/or chamber, that would be most appreciated.
And.... GO!!
Last Edited: