Bronze Lifetime
- Messages
- 11,372
- Reactions
- 26,070
I'm working on some designs for firearm items : bolt rifle stock mods, muzzle devices, reloading tooling.
I'm at the point where I need to do some prototyping and figured a good 3D printer would help.
Budget - Under $1K
Media - SLA resin, PLA, ABS or HDPE
I've looked at a few, both fusion and UV cured resin type. These range from a build space of approximately 5x5x5 to 12x12x15. Obviously, for rifle stock components, the bigger size is better.
Models I've been looking at include:
Thanks in advance,
P7
I'm at the point where I need to do some prototyping and figured a good 3D printer would help.
Budget - Under $1K
Media - SLA resin, PLA, ABS or HDPE
I've looked at a few, both fusion and UV cured resin type. These range from a build space of approximately 5x5x5 to 12x12x15. Obviously, for rifle stock components, the bigger size is better.
Models I've been looking at include:
- Monoprice Voxel
- Creality CR-10
- Anycubic Photon X
- Anycubic Chiron
Thanks in advance,
P7
