Cleaning out some 870 parts.
I accept MO or check, no paypal.
If you want something, post to the ad with "I'll take it", then IM for info.
SOLD SOLD Refinished and repaired Crane 870 Walnut stock. Used, this had a nasty chip when I got it and a lot of dents. The wood was repaired with a donor piece of walnut, and refinished, the buttplate shows lots of wear. Includes original buttplate and a sling swivel stud, not the sling swivel in third pic.
$45 shipped. SOLD
Stock as I received it:
Stripped the old finish off, then filed that area flat, then epoxied an extra piece on. Tried to match the grain as best I could.
Refinished with Minwax Gunstock, then 2 applications of linwax.
I purchased it for a MKI clone that never happened.
Home brew 870 walnut PG. This includes a 4 1/4" brass mounting bolt. Had it on an Express, but don't care for the angle. Just short of the Raptor Birdshead length, about 1/2" shy of that.
This did have a chip on the left side when I received it, made a repair, see last pics. $25 shipped.
Before finish.
870 birch stock. Includes bolt, no buttpad. $30 shipped.
870 Express birch stock. Same as above, no buttpad. $30 shipped.
SPF 870 Wingmaster stock and birch forend, sanded smooth. $30 shipped for both and the bolt. SPF
Assorted forends. Blackhawk, Tac somthing and Butler Creek. The Butler Creek came from a PD issue, pretty beat. $27 shipped for all 3.
Raptor 870 birdshead grip. Includes mounting bolt. VG condition, just don't care for the angle. $24 shipped.
Thanks for looking.
I accept MO or check, no paypal.
If you want something, post to the ad with "I'll take it", then IM for info.
SOLD SOLD Refinished and repaired Crane 870 Walnut stock. Used, this had a nasty chip when I got it and a lot of dents. The wood was repaired with a donor piece of walnut, and refinished, the buttplate shows lots of wear. Includes original buttplate and a sling swivel stud, not the sling swivel in third pic.
$45 shipped. SOLD
Stock as I received it:
Stripped the old finish off, then filed that area flat, then epoxied an extra piece on. Tried to match the grain as best I could.
Refinished with Minwax Gunstock, then 2 applications of linwax.
I purchased it for a MKI clone that never happened.
Home brew 870 walnut PG. This includes a 4 1/4" brass mounting bolt. Had it on an Express, but don't care for the angle. Just short of the Raptor Birdshead length, about 1/2" shy of that.
This did have a chip on the left side when I received it, made a repair, see last pics. $25 shipped.
Before finish.
870 birch stock. Includes bolt, no buttpad. $30 shipped.
870 Express birch stock. Same as above, no buttpad. $30 shipped.
SPF 870 Wingmaster stock and birch forend, sanded smooth. $30 shipped for both and the bolt. SPF
Assorted forends. Blackhawk, Tac somthing and Butler Creek. The Butler Creek came from a PD issue, pretty beat. $27 shipped for all 3.
Raptor 870 birdshead grip. Includes mounting bolt. VG condition, just don't care for the angle. $24 shipped.
Thanks for looking.
Last Edited: