- Messages
- 191
- Reactions
- 21
Honing out a Redding .308 FL sizing die in the neck area, anyone local have a small supply of 320grit Clover (oil) lapping compound they can direct me to? Don't know what I'd do with a 1# can I'd have to buy otherwise...
Redding doesn't offer a service to hone dies in this regard.
If anyone has experience here please chime in. My current Redding Type S bushing dies work fine but I get a nasty donut at the shoulder/neck junction that I'd like to bump out with a modified FL die. (It's a .308-F/TR thing...)
Planning on using a modified AcroLap barrel lap.
Thanks in advance-
Redding doesn't offer a service to hone dies in this regard.
If anyone has experience here please chime in. My current Redding Type S bushing dies work fine but I get a nasty donut at the shoulder/neck junction that I'd like to bump out with a modified FL die. (It's a .308-F/TR thing...)
Planning on using a modified AcroLap barrel lap.
Thanks in advance-