Join the #1 community for gun owners of the Northwest
We believe the 2nd Amendment is best defended through grass-roots organization, education, and advocacy centered around individual gun owners. It is our mission to encourage, organize, and support these efforts throughout Oregon, Washington, Idaho, Montana, and Wyoming.
Discuss firearms and all aspects of firearm ownership
Join others in organizing against anti-gun legislation
Find nearby gun shops, ranges, training, and other resources
Discover free outdoor shooting areas
Stay up to date on firearm-related events
Share photos and video with other members
...and much more!
rmr mount
In automotive design, an RMR, or rear mid-engine, rear-wheel-drive layout (now simply known as MR, or mid-engine, rear-wheel-drive layout), is one in which the rear wheels are driven by an engine placed just in front of them (i.e., the rear axle), behind the passenger compartment. In contrast to the rear-engined RR layout, the center of mass of the engine is in front of the rear axle. This layout is typically chosen for its low moment of inertia and relatively favorable weight distribution (the heaviest component is within the wheelbase, making the main component of its moment of inertia relatively low). The layout has a tendency toward being heavier in the rear than the front, which allows for best balance to be achieved under braking. However, since there is little weight over the front wheels, under acceleration, the front of the car is prone to lift and cause understeer. Most rear-engine layouts have historically been used in smaller vehicles, because the weight of the engine at the rear has an adverse effect on a larger car's handling, making it 'tail-heavy'. It is felt that the low polar inertia is crucial in selection of this layout. The mid-engined layout also uses up central space, making it impractical for any but two-seater sports cars. However, some microvans use this layout, with a small, low engine beneath the loading area. This makes it possible to move the driver right to the front of the vehicle, thus increasing the loading area at the expense of slightly reduced load depth.
In modern racing cars, RMR is the usual configuration and is usually synonymous with "mid-engine". Due to its weight distribution and resulting in favorable vehicle dynamics, this layout is heavily employed in open-wheel Formula racing cars (such as Formula One and IndyCar) as well as purpose-built sports racing cars. This configuration was also common in very small engined 1950s microcars, in which the engines did not take up much space. Because of successes in racing, the RMR platform has been popular for road-going sports cars despite the inherent challenges of design, maintenance and lack of cargo space. The similar mid-engine, four-wheel-drive layout gives many of the same advantages and is used when extra traction is desired, such as in some supercars and in the Group B rally cars.
Bought this new 10ish years ago. Great plinker, probably 400ish rounds through. Comes with factory barrel/sights and another cut down and threaded factory barrel i bought off another member years ago. Will also include a Rucker Machine RMR foot print optic mount (i ran this with a holosun 403c...
Trijicon TA02 4X ACOG. Includes Trijicon ARD and RMR mounting plate. Crosshair reticle. Purchased originally from T-Rex Arms. Lightly used and lovingly cared for. 😎. Comes with original hard case. Meet up in Beaverton/Hillsboro area.
Finally got this together with the Rucker mount found here:
https://www.ruckermachine.com/
He makes so many cool things. This was just what I needed with my SBR Contender. The irons dont work as well when the “pistol” now rifle is so close to your face. Well… and these eyes arent getting any...
Had this on my TA31 to piggyback my RMR. I’ve since repurposed the RMR so the mounts gotta go.
$50, $55 shipped. Comes with everything you need to mount your RMR or Holosun to your ACOG
Ignore the writing in the first photo, I have this cross posted on another online forum.
Thanks yall
I know at least one of you guys have one of these lying around. You had an RMR on your ACOG and you decided to sell or repurpose the RMR and threw the mount in a bin somewhere to never see the light of day.
I need that mount
Looking for something in the 30-60 dollar range but maybe you have...
Up for sale is a once-used RMR mount for various Henry lever guns, Marlin lever guns, and ruger PC’s. Please see attached photo for list of guns this is compatible with.
I used it once to mount a Holosun on my Henry big boy. Shot it once or twice and it sat in the safe ever since.
Paid 50...
New AMS Machine Low-Pro RMR mount
This is great for someone that wants an offset MRDS, helps to protect your expensive sight from being damaged.
This mount will work on any picatinny rail or riser.
Cross-posted on ARFCOM
I take PayPal friends and family/Venmo
Shipping OK, S/H 4.99
No trade...
Selling a like new badger ordnance 30mm offset rmr mount for LPVO’s. Sold the Badger mount a while ago and don’t need this anymore.
Asking for $90 cash local meet up prefered. Listening to cash offers only right now to fund a major purchase.
Thanks!
Up for sale, Southwest Washington, Vancouver area, Clark county area.
A couple leftover ACOG items that I won't be using.
RM35 mount, to mount a RMR or Holosun on top of the ACOG. (Retails for $100)
TA51 picatinny base to mount ACOG to flat top upper or rail. (Retails for $70)
Link for specs...
Spraypainted one partial coat, but great condition otherwise. It’s a right handed legacy lever. $102.64 new, selling it for $50 shipped. No trades. Here’s the company info:
https://www.admmfg.com/trijicon-rmr-lw-mount
Selling a lightly used Reptilia RMR mount for a 30mm LPVO. Can mount a RMR or SRO to any 30mm scope tube at any angle. More info here: https://reptiliacorp.com/product/trijicon-rmr-rof-sar/
Comes with screws for RMR and ring. Retails for about $160. Asking $100 shipped. PayPal or venmo. Not...
Installed a new trigger shoe and nighthawk drop in sear kit, mainspring and recoil spring are changed out. Does not come with 509t plate.
Please message me with a phone number and name if interested, can provide more pics.
Has 4 mags, 3 mags are mbx. Also seems like staccato mags might work...