Join the #1 community for gun owners of the Northwest
We believe the 2nd Amendment is best defended through grass-roots organization, education, and advocacy centered around individual gun owners. It is our mission to encourage, organize, and support these efforts throughout Oregon, Washington, Idaho, Montana, and Wyoming.
Discuss firearms and all aspects of firearm ownership
Join others in organizing against anti-gun legislation
Find nearby gun shops, ranges, training, and other resources
Discover free outdoor shooting areas
Stay up to date on firearm-related events
Share photos and video with other members
...and much more!
m-lok
M-LOK, for Modular Lock, is a free licensed firearm rail interface system developed and patented by Magpul Industries.
M-LOK allows for direct accessory attachment onto the "negative space" (hollow slot) mounting points, and is a competing standard to VLTOR's open sourced KeyMod system for replacing the ubiquitous Picatinny rail in some applications. Compared to the Picatinny rail system, both M-LOK and KeyMod enable the user to have a slimmer, lighter, smoother and more fenestrated handguard/fore-end with accessories mounted only where needed, whereas a Picatinny handguard typically will have rail slots for its whole length resulting in a heavier and bulkier handguard with sharp edges and poorer barrel ventilation.
The M-LOK system can be seen as an evolution of the Magpul Original Equipment (MOE) system, but the two are not fully compatible. Though newer M-LOK accessories can be used on older MOE slot handguards if an adaptor plate is used, there is no adaptor available for using older MOE accessories on the newer M-LOK handguards.
Looking for relatively inexpensive handguard that is 10"-10.5" in length.
M-Lok
Free float
Hardware included
Palmetto state armory preferred (it’s a plinking toy)
Trades I have + cash
Rainer arms brake .224 cal 223/556
VG6 epsilon 223/556
VG6 cage for blast mitigation (makes a massive...
Used for less than 100 rounds. Shoots awesome. I'm selling it because I never shoot it. Barrel is guaranteed sub-MOA by Ballistic Advantage (with match ammo). No lower. Photo is for demonstration purposes only.
Specs:
Aero Precision M4E1 Upper Receiver, Anodized
Aero Precision 15" ATLAS S-ONE...
This was on my backup gun but that was replaced with a galil and I found something I want.
It’s a factory made upper aside from the centurion m-lok hand guard I installed. Everything was torqued down to spec and blue locktight was used where recommended.
This is a socom profile barrel...
I've ended up with several like new (or new) AR parts and would like to offer them as a last minute holiday bundle 🎄
$300 worth of of parts all in original packaging. Asking $140.
• Aero Precision Mil-Spec Carbine Length Buffer & Spring (New)
• B5 Systems SOPMOD Bravo Stock in - ODG (New)
•...
I've got a bnib Aero Precision R-one 10.3" handguard in Kodiak Brown taking up space on my bench. Picked this up recently but have no use for it right now. Asking $115.
UPDATE: 1x upper for sale as one has been sold.
Up for sale is an unfired and new upper from PSA. I bought them as a kit a year ago for some projects, which I abandoned and decided to go in another direction. Have been inside my safe and never fired. Clean and new (I can take more photos if you...
Remington 700 6.5 Creedmoor bolt-action, magazine fed, long range target rifle, with Vortex Scope, and extras for sale. Rifle was built by JTS Precision LLC in Hood River, Oregon. It has a 26-inch heavy barrel, an Area 419 Hellfire self timing muzzle brake, a Timney Trigger set at 5.5 ounces...
Made by HK and manufactured from aircraft grade aluminum with a black hard coat anodized finish, this M-LOK handguard is for the Heckler & Koch MR556 & HK 416 rifles chambered in 5.56x45mm and .223 Rem. This handguard showcases a 12.5″ length and includes a picatinny rail and utilizes M-LOK...
I want to upgrade to another upper so selling my PSA complete upper now.
PSA link, https://palmettostatearmory.com/psa-10-5-5-56-lightweight-m-lok-slant-12-upper-with-mbus-sight-set-bcg-ch-fluted-flash-can-516447012.html
Round count: 300-450ish and only shot in range.
The flip sights were...
I recently purchased a very nice Aero Precision 14.5" upper with an m-lok handguard. I took the day off and was excited for to put together a new build. My plan was to change out the m-lok handguard for a Midwest Industries handguard, but then I ran into this (see photo). This is part of the...
Complete AR15 upper receiver from Larsen Outfitters. Has a 10.5" barrel, chambered in 556 NATO, with a 10" Free float rail with Magpul M-LOK quick attach system. 9310 bolt group, A2 flash hider and 7075 T6 charging handle. Complete, ready to drop on your pistol AR or SBR! All new, never fired...
SOLD PENDING FUNDS
Atlas R-One M-LOK Handguard
by Aero Precision
Branded Ballistic Advantage
Length: 9.3"
Weight: 6.03 oz
Mounting Hardware Weight: 1.90 oz
Full top picatinny rail for optional attachments
Quick disconnect sling socket at the 3, 6 and 9 o'clock positions
Compatible with low...
Hey y’all. Looking to sell or trade my Aero Atlas S-One handguard for a R-one, or a handguard that is similar. I mounted this last summer and have only shot it once, sighting in a scope. I prefer the full length top rail, let me know what y’all have and/or send me an offer!
Looking to part ways with JUST THE UPPER of my Aero .308 M5, because I want to go a different route, shorter and a NiB bolt.
Most of this upper is Aero- the receiver is the M5 receiver, the handguard is a 15” aero atlas m-lok, gas block, & the BCG are both aero as well. The barrel is an 18”...
Great condition, used for one range trip and decided on longer rail.
Comes with all you see.
Two small knicks on right side. Arrived that way, but overall great condition.
$140 shipped.
For sale is a like new oem 15" Sig Sauer M400 Tread M-Lok handguard.
Nothing wrong with it, just swapped it out for the 13" version.
Used once at the range (less than 50 rounds) before I took it off. (The white specs in the attached pics are lint)
Will meet face to face in Hazel Dell area of...
15” UTG Pro Super Slim M-LOK free floating AR platform handguard in black. It’s in really great shape with no damage, dents or scratches.
It comes with all the original parts and accessories you need to mount it up:
Handguard
Barrel Nut
Barrel Nut Shims
Barrel Nut Wrench
Mounting Hardware...
For sale is an EXTREMELY RARE Geissele URG-I Complete, Clone paired with a Geissele Super Duty Lower Receiver and Surefire M300V Scout Light.
The URG-I and lower were purchased directly from Geissele during their very limited run. The Surefire M300V was purchased directly from Surefire. Please...