- Messages
- 206
- Reactions
- 237
- Ad Type
- For Sale
- Price
- $200
- Manufacturer
- Other / Not Listed
- Caliber
- 9mm
- City
- North Seattle
- State
- Washington
- Zip Code
- 98115
I'm offering two separate 9mm brass/primer packages:
Package 1: (500+) 9mm sized/polished/primed mixed headstamp brass which was purchased off Gunbroker auctions last fall when I couldn't find any primers to reload my own brass. Brass is roll sized for uniformity, decapped, wet tumbled with stainless steel media, full length sized for uniformity and primed with your choice of CCI or Winchester Primers. Cases are sparkling clean inside and out, case gauged and ready to be neck expanded/finished off with your favorite powder and projectile. I've personally loaded over 2000 of these primed cases and they were a blessing for my arthritic hands not having to de-prime/re-prime by hand. Made reloading a real spoiled pleasure again. Topping them off with a cast bullet gives you a easily processed plinker for about $.42 cents. Yours to finish hand-loading for $180. With the primer shortage these packages on Gunbroker have been selling for over $200.
Package 2: (600+) 9mm (wet tumbled only) brass plus a brick of fresh (1000) Federal Champion Small Pistol Primers. I need to get rid of some of my stockpiled brass so this might be a good way for a new reloader to get into the hobby with extra primers to spare. Brass is all from indoor range shooting, mostly, but not guaranteed once fired from friends who don't reload. Brass was wet tumbled with Frankford Arsenal Brass Cleaning Solution only, because I don't run steel pins during this raw unprocessed stage. Brass isn't sparkling clean inside, but 90% clean to get started decapping. Selling this package of tumbled/unprocessed brass and primers for $140. If you'd rather have CCI 550's I can substitute them instead of the Federals. SALE PENDING
Package 1: (500+) 9mm sized/polished/primed mixed headstamp brass which was purchased off Gunbroker auctions last fall when I couldn't find any primers to reload my own brass. Brass is roll sized for uniformity, decapped, wet tumbled with stainless steel media, full length sized for uniformity and primed with your choice of CCI or Winchester Primers. Cases are sparkling clean inside and out, case gauged and ready to be neck expanded/finished off with your favorite powder and projectile. I've personally loaded over 2000 of these primed cases and they were a blessing for my arthritic hands not having to de-prime/re-prime by hand. Made reloading a real spoiled pleasure again. Topping them off with a cast bullet gives you a easily processed plinker for about $.42 cents. Yours to finish hand-loading for $180. With the primer shortage these packages on Gunbroker have been selling for over $200.
Package 2: (600+) 9mm (wet tumbled only) brass plus a brick of fresh (1000) Federal Champion Small Pistol Primers. I need to get rid of some of my stockpiled brass so this might be a good way for a new reloader to get into the hobby with extra primers to spare. Brass is all from indoor range shooting, mostly, but not guaranteed once fired from friends who don't reload. Brass was wet tumbled with Frankford Arsenal Brass Cleaning Solution only, because I don't run steel pins during this raw unprocessed stage. Brass isn't sparkling clean inside, but 90% clean to get started decapping. Selling this package of tumbled/unprocessed brass and primers for $140. If you'd rather have CCI 550's I can substitute them instead of the Federals. SALE PENDING
- I agree to the classified rules and terms of service
Last Edited: