Taurus/Beretta 92/96 threading

[B5Ben]

Hey everyone. I have a Taurus 92FS and am curious if anyone has threaded the factory barrel or if an aftermarket barrel is needed for additional length. There is about 5/16" of barrel extending beyond the slide. I haven't spoke to gunsmith or machine shop yet but thought I would float the question here.

Read More

 

[Alexx1401]

Hey everyone. I have a Taurus 92FS and am curious if anyone has threaded the factory barrel or if an aftermarket barrel is needed for additional length. There is about 5/16" of barrel extending beyond the slide. I haven't spoke to gunsmith or machine shop yet but thought I would float the question here.

View attachment 408329

Looks like Brownells has them made by Silencerco for 125 with a protector. So if it will not work doing the one on it this would be a great way to go.

 

[B5Ben]

I have seen those but only found the nitride coated one. I want a stainless version if I end up needing to go with a new barrel.

 

[Alexx1401]

I have seen those but only found the nitride coated one. I want a stainless version if I end up needing to go with a new barrel.

That's $139 at the same place, made by the same company, Silecerco

 

[CountryGent]

It looks like Tornado Tech in Hillsboro could also do the work if you wanted to go that route. Info here. Contact info here. Cheers.