Gold Supporter
- Messages
- 24,791
- Reactions
- 37,649
I have just about given up on finding a reasonably priced 16" barrel for my 9mm/40 Glock Rifle project.
A cheap alternative would be to buy one of these barrel extensions and silver solder it along with a muzzle device to a regular length threaded barrel.
The downside will be that the barrel assy will no longer be removable from the slide. Would this prevent any repairs from being done to the slide itself?
I have an extra Glock 22 slide and a 5" threaded 9mm conversion barrel on hand so this project could be accomplished for about $50ish dollars (excluding silver soldering cost) in additional parts.
A cheap alternative would be to buy one of these barrel extensions and silver solder it along with a muzzle device to a regular length threaded barrel.
Home :: Muzzle Attatchments :: 4in 5in 6in 7in 8in 14-1LH & 1/2-28 Pistol Barrel Extensions
These barrel extensions are made from steel and have an inner diameter over 400 to work with any pistol that has either 14-1 LH or 1/2 -28 right hand female threads Permanently attach to your pistol or SBR to bring the barrel length to 16 Our extensions have a 5/8 -24 male thread on the end to...
ak-builder.com
Kaw Valley Precision Slim XL Pistol Caliber Linear Comp - Black
Kaw Valley Precision Slim XL Pistol Caliber Linear Comp - Black
www.joeboboutfitters.com
The downside will be that the barrel assy will no longer be removable from the slide. Would this prevent any repairs from being done to the slide itself?
I have an extra Glock 22 slide and a 5" threaded 9mm conversion barrel on hand so this project could be accomplished for about $50ish dollars (excluding silver soldering cost) in additional parts.
Last Edited: