PSA Dagger Full Size?

[evandrago]

I am curious if any of you used the newer PSA Dagger Full size S model? Been thinking of that one, the regular G19 clone Dagger is very well reviewed, has interchangable Glock parts/accessories, but not sure of the full size S model?

https://palmettostatearmory.com/psa-dagger-full-size-s-9mm-pistol-with-extreme-carry-cut-rmr-slide-lower-1-3-night-sights-flat-dark-earth.html

Read More

 

[E4mafia]

This caught my eye today too with the deal.

It looks pretty close to a G45 - but comes with a threaded barrel making it 4.5"

I cannot find a single review for the Dagger FS S anywhere online, but I know the OG Dagger was met with praise and concern depending on where you watched/read about it.

https://palmettostatearmory.com/forum/c/psa-products/dagger/76

 

[Member 53328]

Nope. But at $350.00 you're not taking much risk. Personally I'd just get a Glock. If you're patient you can find them for about $50.00 more.

 

[evandrago]

Nope. But at $350.00 you're not taking much risk. Personally I'd just get a Glock. If you're patient you can find them for about $50.00 more.

Thanks! The issue is that darn measure 114. if it passes then getting a gun will be insanely hard for a bit if i am not mistaken.

 

[bradsteen]

Is 114 going to ban just the mags, or firearms as well? If just the mags, I would buy them now and get the gun you want after the ban goes into effect. I did that before the WA ban, and am now sitting on mags for all the guns I plan to buy over the next 10+ years. It's an investment, but now I don't have to worry about having neutered 10rd mags for my dream guns.

 

[evandrago]

Is 114 going to ban just the mags, or firearms as well? If just the mags, I would buy them now and get the gun you want after the ban goes into effect. I did that before the WA ban, and am now sitting on mags for all the guns I plan to buy over the next 10+ years. It's an investment, but now I don't have to worry about having neutered 10rd mags for my dream guns.

You need in person training to get a gun permit, if it passes. There are very few facilities and also the permit process doesn't exist and it will take about 2 years to set it up. But I just read that it won't be an issue most likely. So there is that.

Would Measure 114 create a moratorium on gun purchases until permits were available?

While it is not explicitly outlined in the text of the measure, it is highly likely that gun sales would continue under current regulations until a new permitting system could be created. That would be more in keeping with how the rulemaking process is typically executed after a new law is passed.

While the state might place a moratorium on gun purchases until the new system was in place, such a move would be almost immediately challenged in courts as unconstitutional, according to Ofer Raban, a constitutional law professor at the University of Oregon.

It is more typical in situations where voters approve a law that requires a new state-run system that the Oregon State Police would issue an exception to needing to participate in a new system until that system was up and running.

 

[HiFi Magnetics]

I want to follow-up and use this threading for a dagger full size optics installation. I found a crimson CTS-1250 and was wondering if it will fit?
Thanks,
HFM

 

[Sharkey]

Can't speak about full size but have two of the G19 sized Daggers. One has threaded barrel and other has rear site in front of the RDS. I like both and no issues with either. I think both are docter RDS mount. One has a trueglo and other has a riton RDS. Both were right fits to get on. I would get RMS type mount and those have been way less problematic. I take the standard barrel Dagger and an ext. Magpul mag to church when I volunteer on our security team.

 

[HiFi Magnetics]

I have another crimson that will fit that firearm. I'm just so bummed out that pistol red dot fits and fires so perfect in my tactical rifle. I'm just gonna swap it with this one...
Thank you.

 

[Jrushman]

it will either be a doctor or RMR cut. I run an Riton that is a RMR cut on my full size dagger.

 

[FireArm]

I recently built one, to match a rifle.
Not much into it. A little less then $350 currently, 3lb flat trigger is on the way, flashlight maybe a red dot.