New to reloading

[Dr Prepper]

I was actually about ready to machine an adapter to take standard shell holders when I stumbled on that idea!

They also make a standard shell holder plate. It has a allen screw as a keeper for the shell holder.
Kinda seemed to defeat one of the major principals of the design though..
I just take the rub plate off with the plates and then flip it on to cover the springs when removing installing. Only time they go flying is when im removing or installing. I usually just put my finger over them when flipping the jaws and never have a problem.

But like you pointed out. Theres usually a almost perfect harmonious solution to any problem life has to offer. (except for socio economic apparently)

 

[RVTECH]

They also make a standard shell holder plate.

Yea I am aware of that but had a slightly different design in mind - but a couple drops of superglue solved it!

Make sure you clean the plate well so it's free of any oil before you apply the glue.

 

[Certaindeaf]

So you weigh each powder charge?
There's your problem right there.
Ouch.

 

[Dr Prepper]

Yea I am aware of that but had a slightly different design in mind - but a couple drops of superglue solved it!

Make sure you clean the plate well so it's free of any oil before you apply the glue.

Yup! Kinda figured you knew.

 

[Dr Prepper]

So you weigh each powder charge?
There's your problem right there.
Ouch.

Yeah that's kinda why i mentioned a thrower. A good thrower you can trust and is accurate is the ticket. Rapid fire!

 

[RVTECH]

There's your problem right there.

Weighing charges is not necessarily a 'problem'.

It would be when loading 100's of rounds at a session of a caliber such as 9mm or smaller but with larger pistol and rifle its not so bad when with a good system in place.

 

[Certaindeaf]

Weighing charges is not necessarily a 'problem'.

It would be when loading 100's of rounds at a session of a caliber such as 9mm or smaller but with larger pistol and rifle its not so bad when with a good system in place.

Erm, he asked how he could speed up loading 9x19. He is using an auto scale.

 

[wired]

Ive used Hornady LnL progressives for years. Good service and no problems. I need a part? they send it to me free.