- Messages
- 14
- Reactions
- 50
80% Lower Jigs for AR-15 and 308 80% lowers.
Our Router Jig is truly unlike anything else on the market in that it has been engineered and optimized in every fashion for finishing an 80% lower with a router.
Watch our instructional overview video for in-depth information:
Check out one of our guys finishing a .308 80% lower in 25 minutes:
Industry First External Milling Guide Template Cavities
Hybrid End Mill with 5/16" cutting surface - our Hybrid End Mill (Patent Pending) has been thoroughly optimized for the purpose of finishing 80% lowers with our jig
No-touch wear resistant solid steel side plates for TRUE universal compatibility
Only drill 2 HOLES before milling + wear resistant solid steel drilling guide. Our Hybrid End Mill is so efficient milling aluminum that drilling more holes is not necessary and would just be a waste of precious time. We have also found that optimal results are achieved when fewer holes are drilled prior to milling.
Our Universal Router Adapter houses a high speed bearing which fully supports the end mill in all directions, at all times. This greatly reduces the opportunity for end mill chattering, which in conjunction with our custom Hybrid End Mill, reduces end mill flex by 59% as compared to a 1/4" end mill. The net effect is more efficient milling and better finish quality.
Available for the AR-15 and 308 Platforms. Conversion Kits are also available. Purchase either jig, and you can convert to the other without having to buy an entire other jig. Our conversion kits allow you to retain the components that are common between both jigs any only buy what you need!
www.5dtactical.com
Our Router Jig is truly unlike anything else on the market in that it has been engineered and optimized in every fashion for finishing an 80% lower with a router.
Watch our instructional overview video for in-depth information:
Check out one of our guys finishing a .308 80% lower in 25 minutes:
Industry First External Milling Guide Template Cavities
Hybrid End Mill with 5/16" cutting surface - our Hybrid End Mill (Patent Pending) has been thoroughly optimized for the purpose of finishing 80% lowers with our jig
No-touch wear resistant solid steel side plates for TRUE universal compatibility
Only drill 2 HOLES before milling + wear resistant solid steel drilling guide. Our Hybrid End Mill is so efficient milling aluminum that drilling more holes is not necessary and would just be a waste of precious time. We have also found that optimal results are achieved when fewer holes are drilled prior to milling.
Our Universal Router Adapter houses a high speed bearing which fully supports the end mill in all directions, at all times. This greatly reduces the opportunity for end mill chattering, which in conjunction with our custom Hybrid End Mill, reduces end mill flex by 59% as compared to a 1/4" end mill. The net effect is more efficient milling and better finish quality.
Available for the AR-15 and 308 Platforms. Conversion Kits are also available. Purchase either jig, and you can convert to the other without having to buy an entire other jig. Our conversion kits allow you to retain the components that are common between both jigs any only buy what you need!
www.5dtactical.com