Is a 10mm PCC worth it?

[Kruel J]

That's what .458 SOCOM is for, but truth is 5.56 is fine cats.

Not a true PCC though. But while we're at it a 300BLK would be a great PCC for PCC distances.

 

[Will_White]

I wouldn't consider an option that uses proprietary mags.

^this^

 

[po18guy]

Hipoint 10mm carbine, sure

Low buy-in ($250 and up at WikiArms), good reports and a true lifetime warranty. Don't ultimately like it? flip it!

 

[Will_White]

On a scale from 0-100 the value of sharing mags to me is 0. Not a factor at all to me and never even crossed my mind.

It's also not a random caliber. I have the p220 legion SAO and it's a fun gun. I like 10mm a lot.

If you want to get a 10mm PCC just get a 10mm PCC. You don't need the validation of strangers on the internet.

 

[GWS]

I've owned a TNW and I didn't like it.
The guy I sold it to thinks it's great. Then I tried a Banshee and again, no love connection. and again, the guy I traded it to seemed to like it a lot. I love a 10mm pistol but a 10mm PCC just doesn't work for me. I strongly recommend you find a range with a rental 10mm PCC and try it out. I loved the idea of it, but the reality was no bueno for me.

 

[GWS]

Low buy-in ($250 and up at WikiArms), good reports and a true lifetime warranty. Don't ultimately like it? flip it!

View attachment 2140729

Are these as indestructible as their pistols?

 

[Kruel J]

If you want to get a 10mm PCC just get a 10mm PCC. You don't need the validation of strangers on the internet.

He's not wrong. Don't listen to the haters. Lots of 10mm can't be wrong.

 

[po18guy]

Are these as indestructible as their pistols?

Seem to be. At $250+transfer, I may have to find out.

 

[DirectDrive]

If you like AR controls, the easy button is CMMG Banshee for a 10mm PCC.

I like 10mm a lot and my PCC is 9mm.
You can burn through a lot of ammo with a PCC.

 

[po18guy]

And what's THIS???



A Hi-Point AR? 5.56 and .300 Blackout? Forged 7075-T6 upper and lower. So Del-Ton dies and Hi-Point lives? $499?

 

[ilikegunspdx]

Low buy-in ($250 and up at WikiArms), good reports and a true lifetime warranty. Don't ultimately like it? flip it!

View attachment 2140729

I could never own a hi point. My self respect is worth more to me than that. Also don't want a direct blowback 10mm PCC, only delayed. Ideally roller delayed.

 

[Jay Walk]

If you want it and have an extra grand to piss away, I recommend you purchase it while you can.

I wanted the folding Smith in 9mm but it was new on the market and nobody had one, so I missed the boat and by the time they were readily available, Inslee pulled the plug on WA buyers. His bodyguards could still purchase one to protect him though.

 

[ilikegunspdx]

If you want it and have an extra grand to piss away, I recommend you purchase it while you can.

I wanted the folding Smith in 9mm but it was new on the market and nobody had one, so I missed the boat and by the time they were readily available, Inslee pulled the plug on WA buyers. His bodyguards could still purchase one to protect him though.

Good point.

 

[ilikegunspdx]

Not a true PCC though. But while we're at it a 300BLK would be a great PCC for PCC distances.

Agree. Plus subsonics work with most existing 9mm cans. My fav is BRCC (Battle rifle caliber carbine) . 7.62 x 51 out of roller delayed hk clones with lower angle locking piece and suppressor are incredibly mild. So mild you have to shoot it to believe it.

 

[ZA_Survivalist]

Low buy-in ($250 and up at WikiArms), good reports and a true lifetime warranty. Don't ultimately like it? flip it!

View attachment 2140729

It's actually not that bad!

 

[ilikegunspdx]

Just an fyi I noticed a new video review of the s&w FPC 10mm. It s not a gun I'm interested in cuz not delayed blowback but someone might like to watch the video. I didn't watch so can't comment on usefulness of the video.

View: https://youtu.be/TVsU5dikPaA?si=z77kSbzDKHhGGqQm

 

[negative1]

I guess it is to me. I picked this 10mm Vector up from a very nice guy in the classifieds today. It is really just a range toy I think, but I like that it takes Glock 20 mags that I already had
View attachment 2138429

Now you NEED the binary trigger to empty that tank. The first time I shot one I was surprised at how large and yet compact and easy to keep on target. Nice piece.

 

[Chaffee]

I already owned a Glock 20, so it was easy to talk myself into the CMMG Banshee, it's nice, shoots great, and I do reload, So yes, worth it to me

 

[Camelfilter]

I already owned a Glock 20, so it was easy to talk myself into the CMMG Banshee, it's nice, shoots great, and I do reload, So yes, worth it to me

Have a couple 20's & 29's, a few thousand commercial 10mm & reload.

No interest in a 10mm PCC.

Did sock away some stick mags, "in case" of future interest. Would be stuck with Glock mag compatible, or move to a free State...

 

[Greg S]

When I was in the market for a PCC, the Stribog peaked my interest as I already have several 10mm molds and load for it.

I liked the idea of the added ME but I could get that in an AR SBR as others have stated. I thought about it and have been wanting a 6.5G upper but a year later now, the 300 is looking more interesting.

In the long run, I stuck with the CZ in 9mm as it is just a range toy.