Bronze Supporter
- Messages
- 15,987
- Reactions
- 33,740
So, I finally sourced a set of 3A inserts for this, and got around to fixing it. It came to me with a cut waist strap; so I got my roll of webbing thats the same color, and fixed it. Point Blank Interceptor OTV outershell from 03 contract date, in Woodland. I might sew up a set of 3 buckle straps for secondary closures for the center opening with the same webbing, like the Tactical Tailor IBA/OTV upgrade kit. I aso have a pile of woodland MOLLE gear that I can put on it but haven't decided other than the 2 canteen covers.
I also have 2 MOLLE first gen vests in woodland (shown with 100rd saw pouches from the pile above and some pouches and coyote FLC kit); but am always on the look out for good priced 2nd gen FLC (only 2 buckles) and 3rd gen FLC (adds a zipper) in woodland.
I also have 2 MOLLE first gen vests in woodland (shown with 100rd saw pouches from the pile above and some pouches and coyote FLC kit); but am always on the look out for good priced 2nd gen FLC (only 2 buckles) and 3rd gen FLC (adds a zipper) in woodland.