Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
The GlockStore, where the n00bs go and you should go there to !Yeabut Lenny magill says you need it. And a pyramid trigger, of course.
Thanks for the Loctite heads-up!Gimmick.
Stick with the Glock OEM RSA.
Yes, they are polymer and people think they should "upgrade" to a metal rod.
But the OEM RSA's don't break.....just replace at recommended interval.
Millions of Glocks around the world are running with the OEM RSA !
They are inexpensive. Use 'em !
I scratch-built a G17 and G19 a few years ago and thought I'd "upgrade" to stainless steel guide rods.
Everything was fine until one fell apart at the range....I unknowingly added another failure point.
You have to Loctite the keeper screw.
So folks, stay with the OEM RSA in your Glocks.
One exception might be in a G20 or G40 (10mm) if you are running full house bear loads.
Then go to Jager and get hooked up with an extra power RSA if you think you need it.