Just got my Form 1 can approved. Efile took 30 days , now it's time to make some chips..
The thread adapter will be the NFA item(and must be engraved), not the oil filter. Not sure you can Form 1 this, but am interested. Comparable to a wipe system can.I am tempted to get a Form 1 to use an oil filter and thread adapter. Because I’m classy like James Bond and Ricky Bobby all rolled into one.
Very cool. Ti is very difficult to work with but light weight for sure. If you use a pin-style tumbler you can clean Ti in it and will come out sparkling.1.5" x 6.5" 24tpi Ti tube with 3 SS and 4 Ti baffles and Ti spacers (SS baffles will be hardened to h900 after bore/clip). Ti endcap has built in flash hider and Ti rear mount is for Griffin taper muzzle devices. Baffles will have decreasing bore diameter and be DHC style clipped.
This has 3 SS and 4 Ti RSC cones. The blast spacer is 1.68 and then 2@.625, 2@.5 , 2@.375 and .250 for the last one.neat. My 6.5"x1.5" titanium can weighs about the same with the three lug mount. I think i fit five radial cones in there, with about a 1.5" spacer. I dont know how it compares to a commercial can in volume reduction, but I can shoot 9mm without ear protection just fine.