AR15 Upper Receiver Action Block

Discussion in 'Maintenance & Gunsmithing' started by Andy, Apr 26, 2011.

  1. Andy

    Andy
    Aurora, OR
    Active Member

    Messages:
    539
    Likes Received:
    32
    Does anyone in the Portland area sell the upper receiver blocks?

    I'd like the change out my muzzle brake and would probably end up spending the same amount to have someone else do it.

    Thanks,
    Andy
     
  2. jaweber

    jaweber
    Yakima
    Member

    Messages:
    53
    Likes Received:
    2
    i've never really looked i got mine from pkfirearms online it was fairly priced and took about 2-3 days to arrive. if this helps at all?
     
  3. Velzey

    Velzey
    Estacada Gun Smith
    Büchsenmacher Bronze Vendor

    Messages:
    2,881
    Likes Received:
    5,635
    Wild bills in molalla I think? You may want to call and ask...
     
  4. deadshot2

    deadshot2
    NW Quadrant WA State
    Well-Known Member

    Messages:
    2,407
    Likes Received:
    539
    To change all the muzzle brakes on my AR Barrels I made my own barrel clamp. Two pieces of red oak clamped together and drilled right down the part line with the first drill size under the barrel diameter. Clamped it in my vise and got the job done. My biggest issue was with the "Armorers Tool". For some reason they make them too thick to fit between the crush washer and the shoulder of the "brake" or flash supressor. Have had to grind every one I've had to fit.
     

Share This Page