I blame ObamaCare
Bush's fault! They've gone up, but what hasn't!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I blame ObamaCare
Not all free float rails require use of a proprietary barrel nut. The Centurion C4 series and Midwest Industries G2 & SS series rail systems, for example, are two piece FF and utilize the standard GI barrel nut. The delta ring, weld spring, retainer snap ring and handguard cap must be removed. This can be done either by cutting them off with a Dremel tool or if you wish to save the parts for reuse you need remove and reinstall the muzzle devise, FSB and barrel nut.
The Daniel Defense Omega Rail is FF and does not require any modification at all except removal of the existing handguard.
first off let me say I am knowledgeable about rifles. but my AR knowledge is limited therefore i'm probably gonna be asking a few stupid questions.
I recently purchased a new Bushmaster QRC .223 with a red dot sight on it.
I was wanting to put a vertical foregrip on it but it does not come with a rail.
I was looking at a AIM Sports Inc Rifle-Length AR Free Float Quad Rail- V3 with a Bushmaster Short Vertical Forward Grip. are those compatible for the rifle? If not any help would be appreciated.
IMHO grippods make horrible bipods, and are bulky for a foregrip.
I see them all the time for less than that. I picked my up $25 LNIB, and yes it is a real one with the steel reinforced legs.
Two Grip Pods GPS-02 Steel Legs (authentic mil-spec models)
Personally I like them.
Are there better bipods? Without question, but they get the job done. M4s and clones are not precision weapons.
Are there smaller VFG? Again, without question lighter ones too, but if that is what I'm after I'd rather have a BCM KAG
Boboclown and eldbillbo aren't looking at the big picture.
The Big Picture was already taken. The GripPods were discarded by most who left the wire.