- Messages
- 31
- Reactions
- 12
loading a few 45 acp rounds. Noticed two things... a couple pieces of brass are very slightly concave on the primer end. Primer sits fine and cartridge slips right in the cartridge gage. Any problem?
Next, I am loading a 200 gr semi wad lead bullet/ 4.4 gr hp38. In seating the lead to the oal, the lead is in the brass all the way to where the taper starts. any issues? (see picture)
<broken link removed>
Next, I am loading a 200 gr semi wad lead bullet/ 4.4 gr hp38. In seating the lead to the oal, the lead is in the brass all the way to where the taper starts. any issues? (see picture)
<broken link removed>