- Messages
- 1,061
- Reactions
- 1,131
- Ad Type
- For Sale
- For Trade
- Price
- $30
- Manufacturer
- Other / Not Listed
- Caliber
- Other / Not Listed
- City
- Eugene
- State
- Oregon
- Zip Code
- 97405
I designed and print these for 37mm launcher use. I believe they are the best shell on the market currently.
I sell on etsy and ebay, figured I would offer them up to members here as well for a discounted price!
Heres some info on them; feel free to message me with any questions
******The LongRanger will need to be seated in shells 3 inches or longer due to the length*******
The LongRanger as shown will NOT work in standard 2" short shells. The nose cone will fit in 2" shells and works well (albeit not as accurate) without the tail fin assembly and can be bought separately.
----------------------------------------------
-Unique 2-piece design allows the user to fill these projectiles with a multitude of substances. With a large payload these work great for smoke, CS, bird bangers, or flares!
-A large fin sections allows this projectile to stabilize in flight with amazing accuracy!
-The lower finned portion has a fuse hole that fits standard 1/8th inch cannon fuse (can also be plugged with hot glue if not used)
-Recessed design allows the projectile to fit quite snug in your shell casing - no need for ineffective gimmicks like rubber bands or tape!
-Includes a powder press cup for each projectile that firmly holds your powder load in the powder bushing underneath your projectile
Simply fill with your desired substance and use a small dab of glue to seal the halves together (optional) they fit together quite tightly
----------------------------------------------
CAD designed and printed in PLA; these projectiles are designed to provide the best accuracy, largest payload, and farthest distance possible from your 37mm flare launcher.
Pricing is as follows.
5/30$
10/50$
20/80$
30/110$
PM for details.
I sell on etsy and ebay, figured I would offer them up to members here as well for a discounted price!
Heres some info on them; feel free to message me with any questions
******The LongRanger will need to be seated in shells 3 inches or longer due to the length*******
The LongRanger as shown will NOT work in standard 2" short shells. The nose cone will fit in 2" shells and works well (albeit not as accurate) without the tail fin assembly and can be bought separately.
----------------------------------------------
-Unique 2-piece design allows the user to fill these projectiles with a multitude of substances. With a large payload these work great for smoke, CS, bird bangers, or flares!
-A large fin sections allows this projectile to stabilize in flight with amazing accuracy!
-The lower finned portion has a fuse hole that fits standard 1/8th inch cannon fuse (can also be plugged with hot glue if not used)
-Recessed design allows the projectile to fit quite snug in your shell casing - no need for ineffective gimmicks like rubber bands or tape!
-Includes a powder press cup for each projectile that firmly holds your powder load in the powder bushing underneath your projectile
Simply fill with your desired substance and use a small dab of glue to seal the halves together (optional) they fit together quite tightly
----------------------------------------------
CAD designed and printed in PLA; these projectiles are designed to provide the best accuracy, largest payload, and farthest distance possible from your 37mm flare launcher.
Pricing is as follows.
5/30$
10/50$
20/80$
30/110$
PM for details.
Last Edited:
