1911 colt failure to feed

[ZigZagZeke]

I have a remington magazine also. Never had the problem. Root cause is magazine. I thought this was a solid platform. This is not reliable. Stick with colt magazines? At this point Its revolver.

If you no longer want that Colt 1911 I'll give $100 for it.

 

[barnabus1999]

They are - but you are still less than forthcoming on information.

What is the brand of this 1911 and how many rounds have you fired through it?

Colt 1911 Winchester ammunition reasonably 400 rounds

 

[barnabus1999]

If you no longer want that Colt 1911 I'll give $100 for it.

I said this was not funny

 

[barnabus1999]

If you no longer want that Colt 1911 I'll give $100 for it.

I will gladly see my life for a Winchester 45 LC

 

[barnabus1999]

They are - but you are still less than forthcoming on information.

What is the brand of this 1911 and how many rounds have you fired through it?

A model 70 Colt government issue. About 400 rounds. Someone commented on feed ramp.

It's my beater gun. Maybe my expectations are not correct.

Apologize for lack of info.

 

[RVTECH]

A model 70 Colt government issue.

I think you mean a 'Series 70'. Do you know what year of Mfg. it is?

 

[solv3nt]

A model 70 Colt government issue. About 400 rounds. Someone commented on feed ramp.

It's my beater gun. Maybe my expectations are not correct.

Apologize for lack of info.

Have you had 400 flawless rounds, or has this always been a problem?

 

[barnabus1999]

Model O.
1911C

Does that help?

 

[barnabus1999]

Have you had 400 flawless rounds, or has this always been a problem?

The jamming has not occurred. The odd ejection for a while now

 

[barnabus1999]

It gets dirty

 

[RVTECH]

Well, this is the 2nd 1911 with its finish nearly completely removed by sanding I have seen!

 

[barnabus1999]

I can't test for a few days. I'm inclined to carry a revolver now. Yes I can go clean it all up but it'll get dirty. I can't rely on it.

 

[solv3nt]

I can't test for a few days. I'm inclined to carry a revolver now. Yes I can go clean it all up but it'll get dirty. I can't rely on it.

Try running wet with the factory magazines and report back.

 

[barnabus1999]

Well, this is the 2nd 1911 with its finish nearly completely removed by sanding I have seen!

Yes. That happened with the idiot scratch and I got carried away. I have a couple more. That's my first one. I was having fun trying to experiment with metal.

 

[barnabus1999]

Thank you all. I appreciate the help.

 

[crstrode]

Amazing :-0

 

[deadeye]

Number one issue IMO is ammo being used. Winchester especially white box is a dirty dirty cheap garbage that should never be for depending your life on. Try getting some better-quality ammo, using the factory mag, plenty of oil and don't limp wrist it and see how it functions.

 

[BillyJean]

Shoot me a PM if you want to sell

 

[Quirt Evans]

Suggested reading:
https://rangehot.com/1911-troubleshooting-feed-failures/

http://how-i-did-it.org/magazines2/read-my-lips.html

 

[Cerberus Group]

First off, that's not a Series 70, from the roll mark shown on the slide, it appears made in the 60s on back. Serial number will date it.

Not enough info to diagnose...if ya got a pic of the position of the round when everything stops...that would help.

...and it appears it's been worked over a bit.