Join the #1 community for gun owners of the Northwest
We believe the 2nd Amendment is best defended through grass-roots organization, education, and advocacy centered around individual gun owners. It is our mission to encourage, organize, and support these efforts throughout Oregon, Washington, Idaho, Montana, and Wyoming.
Discuss firearms and all aspects of firearm ownership
Join others in organizing against anti-gun legislation
Find nearby gun shops, ranges, training, and other resources
Discover free outdoor shooting areas
Stay up to date on firearm-related events
Share photos and video with other members
...and much more!
square deal
The Square Deal was Theodore Roosevelt's domestic program, which reflected his three major goals: conservation of natural resources, control of corporations, and consumer protection.These three demands are often referred to as the "three Cs" of Roosevelt's Square Deal. Thus, it aimed at helping middle class citizens and involved attacking plutocracy and bad trusts while at the same time protecting business from the most extreme demands of organized labor. He explained in 1901–1909:
When I say that I am for the square deal, I mean not merely that I stand for fair play under the present rules of the game, but that I stand for having those rules changed so as to work for a more substantial equality of opportunity and of reward for equally good service.
A progressive Republican, Roosevelt believed in government action to mitigate social evils, and as president he in 1908 denounced "the representatives of predatory wealth" as guilty of "all forms of iniquity from the oppression of wage workers to unfair and unwholesome methods of crushing competition, and to defrauding the public by stock-jobbing and the manipulation of securities."During his second term, Roosevelt tried to extend his Square Deal further, but was blocked by conservative Republicans in Congress.
I need to sell this square deal setup for .45 acp. I have too many dillon presses and not enough room for all of them and this hasn't been used since I bought it since there's really no need if you have two 650's and a 550. I think I paid $350 for it and just want to make my money back to invest...
$350
Complete with small and large primer and powder slides.
Custom riser.
Armanov (I believe) micrometer adjustment on powder slide.
Clean in great condition.
misterarman AKA John 360.771.0013
$400 For the Press.
I also have a brand new 9mm Caliber Conversion that I could set this machine up with or available at an additional charge.
The Invoice from Dillon was $646 of Warranty work
Including new Frame, Handle and Piwder Mrasure.
Add $25 for the Tools and Holder.
The Ultramount...
Square Deal B caliber conversion, 38 Special / 357 Magnum. Bought new around the start of the year, loaded enough revolver ammo to carry me through for a good long time, and got rid of the Square Deal B. All locator pins and replacement primer punch pin included, complete set. All 3 seating...
For sale New in box Dillon Square Deal B. This is a progressive Press meaning you can load up to 400 rounds per hour, if you can keep the primers coming. And it comes nearly ready to go. All you need to do is adjust the powder dispenser to whatever load you want. Then fill the primer tube and...
This is set up for 9mm. New dies, toolhead & bushings. Comes with 1 primer tube & no bins. Bench mount not included, just the loader. Works great. I can take better pics if needed. This is local for now in the Medford area. $350 OBO
I'm looking to start reloading 44 magnum on my Square Deal, so hoping to find a caliber conversion kit, and maybe a spare toolhead or two. Thanks for looking.
I can pay cash or offer trades for 5.56 ammo, 12 gauge buckshot, 5.56 brass, and 9mm brass.
This was sent in to Dillon and completely serviced/restored in February. Basically a new machine again. It has not loaded a single round since it was returned. I just found a good deal on a 650 so I’m upgrading. This also comes with a complete large primer assembly ($95). Comes with a pile...
Like the topic says, I've got a Square Deal B for sale. Has the .45 acp dies installed. Works great, I've cranked out thousands of rounds on this thing.Dillon recently replaced the primer alarm and one of the arms for me (zero cost) and it gets the job done great. Have extra parts
$350
Press works fine like it should. Two seating stems, one for round nose one for flat nose. Large primer pick up tube and I have a blue catch bin I didn't include in the pictures. Ready for Reloading just need your primers, brass and bullets.
$300 cash. Possible trade for a quality Leupold...
My SDB is set-up for 9mm, on a Dillon Strong Mount. I've got 40 S&W and .45 acp dies also. It's been a reliable machine over the years, and comes with a few extras $450
• Dillon Strong Mount
• Spare parts kit
• Tool Holder w/wrench set
• Caliber Conversion Kit w/Toolhead 40S&W
• Caliber...
Dillon Square Deal B set up in 45 ACP. Works great, I’ve loaded at least 1,000, maybe 1,500 rounds on this since I acquired it used a few years ago. Prefer to meet in Tigard/Tualatin area.
Similar to the other ad I have, I bought this years ago and haven't even set it up.
This one is not rebuilt, but looks in good shape.
I can meet around town and down to Albany.
$300
Well, I bought this 14 years ago and had Dillon service it, but it has sat in the box, unused since I got it back from Dillon; so I guess I'm not going to use it.
I just opened the box to take this picture. The rebuilt receipt is in the box.
The machines are over $600 new and the conversion kits...
I'm looking to part ways with my complete setup, and I mean everything. Only $2000. You can literally be up and running within minutes of taking ownership.
I am not willing to part out pieces of this sale and and I am not looking for trades. This is truly a once in a lifetime deal for someone...
My dad died in March and I finally have his basement cleaned up enough to easily get to his reloading equipment. He was a machine gun guy and has a lot of reloading stuff. In order to save a crapload of time I'm looking for someone to come and buy the entire lot of presses, spare parts...