- Messages
- 80
- Reactions
- 50
- Ad Type
- For Sale
- Manufacturer
- Other / Not Listed
- Caliber
- Other / Not Listed
- City
- Auburn
- State
- Washington
- Zip Code
- 98001
45 RCBS carbide dies with RCBS taper crimp die - $40
9mm RCBS carbide dies with Redding taper crimp die - $40
10mm Hornady taper crimp dies - $30
.223 RCBS SB FL dies with Hornady taper crimp die - $40
Lyman 7.62x54r two die set - $30
Thumlers Tumbler Model B w/SS media (3-4lbs) - $200
RCBS manual Pro 2000 w/primer tool, small primer strips, 1 die plate, indexing keys, loading bins, NO POWDER MEASURE - $300
.223 steel sizing die, needs decapping rod (free under RCBS warranty)- $10
30-06 neck sizing die, brand new - $30
RCBS shell holder #4 - $5
RCBS shell holder #2 - $5
RCBS priming tool large tray (tray only) - $5
Forster case trimmer w/Misc collets - $80
Lee Perfect Powder measure w/stand - $20
Straight press handle from RC2 - $10
RCBS loading tray - $5
RCBS .44 steel sizing die - $10
Lee 9mm factory crimp die - $15
RCBS primer flipper - $5
Misc hand/manual trimming tools (Lyman EZ trim) - $15
Lee Pro 1000 complete and setup for 10mm - $150
I'm located in Auburn. Will ship for actual cost of shipping. Dies are mostly not in their original boxes but are in boxes.
9mm RCBS carbide dies with Redding taper crimp die - $40
10mm Hornady taper crimp dies - $30
.223 RCBS SB FL dies with Hornady taper crimp die - $40
Lyman 7.62x54r two die set - $30
Thumlers Tumbler Model B w/SS media (3-4lbs) - $200
RCBS manual Pro 2000 w/primer tool, small primer strips, 1 die plate, indexing keys, loading bins, NO POWDER MEASURE - $300
.223 steel sizing die, needs decapping rod (free under RCBS warranty)- $10
30-06 neck sizing die, brand new - $30
RCBS shell holder #4 - $5
RCBS shell holder #2 - $5
RCBS priming tool large tray (tray only) - $5
Forster case trimmer w/Misc collets - $80
Lee Perfect Powder measure w/stand - $20
Straight press handle from RC2 - $10
RCBS loading tray - $5
RCBS .44 steel sizing die - $10
Lee 9mm factory crimp die - $15
RCBS primer flipper - $5
Misc hand/manual trimming tools (Lyman EZ trim) - $15
Lee Pro 1000 complete and setup for 10mm - $150
I'm located in Auburn. Will ship for actual cost of shipping. Dies are mostly not in their original boxes but are in boxes.
- I agree to the classified rules and terms of service