Bronze Supporter
- Messages
- 5,247
- Reactions
- 10,728
If the front falls off of your Umarex CP88 it's not the end of the world.
The tiny 2mm x .5mm thread screw, in the spring guide, under the barrel has stripped out.
You can replace it by drilling and tapping the hole in the spring guide out to 6x32, 1/4"
deeper and using a 6x32" socket head screw, cut to length.
Or, you can spend $40.00 for a replacement kit on E-Bay.
The tiny 2mm x .5mm thread screw, in the spring guide, under the barrel has stripped out.
You can replace it by drilling and tapping the hole in the spring guide out to 6x32, 1/4"
deeper and using a 6x32" socket head screw, cut to length.
Or, you can spend $40.00 for a replacement kit on E-Bay.
Last Edited: