Trade powder primers dies factory ammunition.

[Olddogcaller]

Ad Type

1. For Trade

Manufacturer

Other / Not Listed

Caliber

Other / Not Listed

City

Glendale

State

Oregon

Zip Code

97442

I'm looking for a good .357 revolver or a 20" chainsaw.
I have primers, powder and factory ammo for trade.
Thanks.

Read More

 

[Strickland]

I have a good chainsaw what kinds of primers and power do you have

 

[Olddogcaller]

Hi. Have all types of primers.
If you can let me know what powders you are interested in, it would be better. I have a bunch.
What chainsaw do you have?Thanks, Leon.

 

[Strickland]

Hi. Have all types of primers.
If you can let me know what powders you are interested in, it would be better. I have a bunch.
What chainsaw do you have?Thanks, Leon.

Hi. Have all types of primers.
If you can let me know what powders you are interested in, it would be better. I have a bunch.
What chainsaw do you have?Thanks, Leon.

Well Leon I have a Husqvarna 45 with a 22 or 24 in. Bar was rebuilt last year with new head,rings,and piston runs good. What I'm looking for is small pistol primers in CCI,small rifle primers,and small magnum pistol primers. The powders are IMR 4064 and H110 I also have probably 4 or 5 extra chains for it 2 or 3 are new all have a lot of life left

 

[Olddogcaller]

Sounds like a saw I would be interested in.
I have plenty of the primers you want. I'll go out to my shop and double check the powders, but should have what you need.
we can talk about trade after that?
I'm not home until about 1 pm so will let you know then.
Thanks.

 

[Strickland]

Sounds like a saw I would be interested in.
I have plenty of the primers you want. I'll go out to my shop and double check the powders, but should have what you need.
we can talk about trade after that?
I'm not home until about 1 pm so will let you know then.
Thanks.

Okay

 

[Strickland]

Okay

I'm also looking for carbide dies for 30 carbine

 

[Olddogcaller]

I have a couple h110….

 

[Olddogcaller]

Lots of 4198 4350…… no 4064.
most of my rifle primers are all br4 or benchrest.
See if anything else in pics is useable.

 

[Olddogcaller]

Most of my powder n stuff is for rifle. Long range, varmint, target..

 

[Strickland]

I'm sorry but I was thinking about a different saw I had before this is a 51 with a 24 in bar and there's 4 chains jeez it takes a long time to upload photos

 

[Strickland]

I'm sorry but I was thinking about a different saw I had before this is a 51 with a 24 in bar and there's 4 chains jeez it takes a long time to upload photos

View attachment 1037291 View attachment 1037292

I also have cash if you want to sell

 

[Strickland]

I also have cash if you want to sell

I'm sorry but I was thinking about a different saw I had before this is a 51 with a 24 in bar and there's 4 chains jeez it takes a long time to upload photos

View attachment 1037291 View attachment 1037292

I hope you're still interested

 

[Olddogcaller]

Hi. I'm not as thrilled about that saw. But what will you offer me in trade? I can sell you some stuff also.
Thanks.

 

[Strickland]

Hi. I'm not as thrilled about that saw. But what will you offer me in trade? I can sell you some stuff also.
Thanks.

I'm not sure what you would be interested in for trade give me a few things you're interested in and I'll see what I can part with and how much is the H110 and IMR 4350 a pound , primers by the 1000

 

[Strickland]

I'm not sure what you would be interested in for trade give me a few things you're interested in and I'll see what I can part with and how much is the H110 and IMR 4350 a pound , primers by the 1000

That saw is the one that was rebuilt and runs great

 

[Olddogcaller]

How much are you asking for the saw in trade?

 

[Olddogcaller]

I had a 8 lb jug of IMR 4350 and just opened it to see 4 pounds. I have 4 left in it. Hated to break it up but the guy was begging for it and offered me 400.00. I sold it to him for 300 as 4 seemed way too much.

 

[Strickland]

I'm thinking about 300

 

[Strickland]

A saw equivalent of that is around 550