- Messages
- 49
- Reactions
- 21
I hate having to sell this light, but I have finacial obligations to take care of. As shown in the photos, I have three Power Cables with grip switch, but one of them works fine. The other two, it needs an in depth look thru, but I'm sure it'll work fine as well. The cables are used, the light has only had less than 30min of use. I know the value of this light, so please, no low ballers. What you see in the pics is what's for sale, it's all I have for the Hellfighter.
Specs are as follows:
The HellFighter® WeaponLight for crew-served weapons and heavy guns packs power and versatility into a tough, compact package that weighs only 10 pounds and measures a mere eight inches in length. It features a blinding 3,000-lumen beam with enough reach to illuminate targets hundreds of yards away and enough surround beam to make it perfect for patrol or search-and-rescue operations.
Built to withstand intense recoil and combat conditions, the HellFighter's water-resistant body is constructed from high-strength aerospace aluminum with a Mil-Spec Type III hard anodizing finish. A 5mm multi-coated Pyrex® window protects its lamp assembly, and the window itself is protected from dust, mud, and heavy particle impact by either a swing-open amber filter for cutting through smoke or dust, a swing-open infrared for use with night vision devices (NVDs), or a swing-open opaque cover.
The HellFighter's rugged high-intensity discharge (HID) lamp is powered by one or two military BA-5590 batteries or from a 12-volt auto battery, and is virtually immune to failure from recoil, vibration, or impact since it has no filament to break or burn out.
Runtimes are as follows:
One BA-5590 1.5 hours
Two BA-5590, parallel: 3.0 hours
12V vehicle system: Continuous
The HellFighter is activated via its body-mounted pushbutton switch, or by remote pressure pad switches, or by a remote grip switch for the M2HB machine gun. All cable/switch assemblies are sold separately.
The Hellfighter is available with a variety of mounts that allow you to attach it to:
- M2HB .50 caliber machine gun, with or without ballistic shield
- M134 or similar Minigun
- M240-variant machine guns
- M249 machine gun
- Mk19 grenade launcher
- AAV7A1 "AmTrack" light mounting stud
- Virtually any vehicle or vessel with available flat surface
All mounts incorporate a T-rail system that allows you to quickly attach and detach the HellFighter from the mount.
The HellFighter can also be configured for used as a handheld searchlight, powered either by a battery pack or by a vehicle accessory (cigarette lighter) socket. All mounting systems are sold separately.
<broken link removed>
Call or text me @ FiveZeroThree-740-NineZeroEightNine
Specs are as follows:
The HellFighter® WeaponLight for crew-served weapons and heavy guns packs power and versatility into a tough, compact package that weighs only 10 pounds and measures a mere eight inches in length. It features a blinding 3,000-lumen beam with enough reach to illuminate targets hundreds of yards away and enough surround beam to make it perfect for patrol or search-and-rescue operations.
Built to withstand intense recoil and combat conditions, the HellFighter's water-resistant body is constructed from high-strength aerospace aluminum with a Mil-Spec Type III hard anodizing finish. A 5mm multi-coated Pyrex® window protects its lamp assembly, and the window itself is protected from dust, mud, and heavy particle impact by either a swing-open amber filter for cutting through smoke or dust, a swing-open infrared for use with night vision devices (NVDs), or a swing-open opaque cover.
The HellFighter's rugged high-intensity discharge (HID) lamp is powered by one or two military BA-5590 batteries or from a 12-volt auto battery, and is virtually immune to failure from recoil, vibration, or impact since it has no filament to break or burn out.
Runtimes are as follows:
One BA-5590 1.5 hours
Two BA-5590, parallel: 3.0 hours
12V vehicle system: Continuous
The HellFighter is activated via its body-mounted pushbutton switch, or by remote pressure pad switches, or by a remote grip switch for the M2HB machine gun. All cable/switch assemblies are sold separately.
The Hellfighter is available with a variety of mounts that allow you to attach it to:
- M2HB .50 caliber machine gun, with or without ballistic shield
- M134 or similar Minigun
- M240-variant machine guns
- M249 machine gun
- Mk19 grenade launcher
- AAV7A1 "AmTrack" light mounting stud
- Virtually any vehicle or vessel with available flat surface
All mounts incorporate a T-rail system that allows you to quickly attach and detach the HellFighter from the mount.
The HellFighter can also be configured for used as a handheld searchlight, powered either by a battery pack or by a vehicle accessory (cigarette lighter) socket. All mounting systems are sold separately.
<broken link removed>
Call or text me @ FiveZeroThree-740-NineZeroEightNine
