Supressor Sight Pusher tool

Messages
171
Reactions
101
Hey guys,


Besides a punch and a hammer, do any of you use a sight pusher tool for installation of supressor sights? I have a standard trijicon pusher that I use; however, it doesn't work for raised sights. Ideally It would be universal where I could use it for various pistols. I have a 34 MOS and a USP that need some new supressor sights, so I'm thinking buying the tool might pay for itself..... Any thoughts?
 
On another firearms site I used to frequent, we would pass around a threading die for adding threads to the end of our neutered AKM barrels. The tool went all over the USA with each person promising to take care of the tool as if it was their own, and cover the return shipping. There was never a problem, although I will admit this was done between well established members with good reputations.

I know there are others here, myself included, who could benefit in the use of a sight pusher but not willing to spend $100 for the pleasure. It would be cool if we could do something like described above, but there is risk involved.
 

v0lcom13sn0w

Messages
10,607
Reactions
39,077
On another firearms site I used to frequent, we would pass around a threading die for adding threads to the end of our neutered AKM barrels. The tool went all over the USA with each person promising to take care of the tool as if it was their own, and cover the return shipping. There was never a problem, although I will admit this was done between well established members with good reputations.

I know there are others here, myself included, who could benefit in the use of a sight pusher but not willing to spend $100 for the pleasure. It would be cool if we could do something like described above, but there is risk involved.
that's pretty awesome to know people can be trusted with another guys tools. at work, sometimes its hard for me to lend my snap-on tools to someone especially when they dont return it after theyre done and i have to go get it. also, when they return it filthy.

the guy im talking about doesnt work here anymore;)
 

UPCOMING EVENTS

22 Rimfire Challenge
Redmond Rod and Gun Club
Redmond, OR 97756, USA
Rimfire Challenge May 8th @ DRRC
Douglas Ridge Rifle Club
27787 OR-224, Eagle Creek, OR 97022, USA

LATEST RESOURCE REVIEWS

  • A Cut Above Pawn
    5.00 star(s)
    Professional business
    This business has been my go to transfer dealer for years. Best you can find in Washington County
  • A Cut Above Pawn
    5.00 star(s)
    Fantastic Customer Service!
    Recently, they helped my lady transfer a pistol to a family member in CA. Most FFLs would have told us to pound sand when we mentioned where we...
  • HighLine Firearms
    5.00 star(s)
    One of the best!
    I have bought from online and in person. Great store, he had things I did not know were needed. I try and recommend Highline Firearms to people I...
  • Copeland Custom Gunworks
    5.00 star(s)
    The only gunsmith I'll use
    Tim has done a few projects for me and the result is always the same. Amazing. End of story. From complete refinish to custom machining, Tim is...
  • Copeland Custom Gunworks
    5.00 star(s)
    great work refinishing my 27 year old 1991 a1 compact colt .45
    Tim did a great job making my gun look brand new again and replacing the old parts inside. Super Happy!!
Top Bottom