Suppressor mounts, griffin plan a, dead air keymo key micro, direct thread

[BattleReadyBunny]

Ad Type

1. For Sale
2. For Trade

Price

$1

Manufacturer

Other / Not Listed

City

Vancouver

State

Washington

Zip Code

98661

1. I have read and accept the classified system rules and terms of service.

Price: Listed , extra for shipping if not local
Only Accepting Trades for following; no other trades will be responded to.
* Surefire Scout Light - vampire - single cell
* Surefire XC3 WML
* Aimpoint CompM4s
*(Cash in either direction)
Location: Vancouver, WA

I look at prices online prior to posting. And I try to list for a fair price. So no low balling. If my price is outlandish, please provide examples. I reserve the right to ignore you if you fail to read this entire ad. Ex: offering trades not listed. Low balling without examples. Asking how much, when it's clearly listed, etc

I have too much stuff, I'm getting rid of it. My goal is to help fund my move out of WA with this money, as well as have less stuff to move

All parts are used, unless otherwise stated. Anything out of the ordinary will be listed and price will reflect it. All used muzzle device have been soaking in acetone for 48hrs and may have carbon, rocksett, or loctite left over on them. WD40 has been applied to all used components as a rust preventative measure.

Suppressor Adapters:
Miscellaneous Direct Threads - $20 each
1x - Bravo Hub to 1/2x28
6x - Bravo Hub to 5/8x24
1x - Bravo Hub to M24x1.5RH

6x 5x- Dead Air Keymo / Keymicro bravo hub adapter - $150 each

4x 3x- Griffin Armament Plan A bravo Hub Adapter Mount (short) - black nitride - $50ea

1x - Griffin Armament Plan A bravo Hub Adapter Mount (short) - heat treat - $40

Muzzle devices
1x - Griffin Armament Paladin Plan A taper mount - 1/2x28 - new in box - $70

1x - Griffin Armament Paladin Plan A taper mount - 5/8x24 - new in box - $70

1x - Griffin Armament EZ brake Plan A taper mount - 5/8x24 - new in packaging - $60

1x - Griffin Armament Paladin Plan A taper mount - 1/2x28 - used, previously pinned and welded (see photo) - $40

3x 2x - Griffin Armament Paladin Plan A taper mount - 5/8x24 - used - $50ea

1x - Griffin Armament Minimalist Flash hider Plan A taper mount - 1/2x28 - used - $50

2x - JMAC Customs 360HD X37, M24x1.5RH to 1.375 hub external direct thread, face mount - used - $100ea

2x - Cobalt Kinetics RCB-KM keymo muzzle device - 1/2x28 - used previously pinned and welded (see photo) - $60ea

1x - Dead Air Keymo Muzzle Brake - 5/8x24 - used - $60

1x - SOLGW keymo NOX Flash hider - 1/2x28 - used, ground a little off the tip to fit suppressor, recommend if it bothers you, you can paint it with high temp paint (see photo), ground tang off set so it helps minimize tuning fork sound - $50

Read More

 

[BattleReadyBunny]

Sold muzzle devices have been marked on the post

 

[LacDawg]

To start off, I am selling off much of my firearms, parts, ammo, etc. I will be continuously uploading more items, as I go through everything. I am just mass posting much of my stuff, so if a price seems too high, please let me know and provide valid examples, and I will adjust my pricing accordingly (as I do with all my stuff for anyone who have seen my posts) . That being said, low ballers will be ignored. Again, if my price is too high provide reasonable evidence and examples, and I will adjust. Reason for selling is simple, less for me to move. I am seeking work out of the area and have a had some good opportunities pop up. So to get a head of things, I would like to start liquating stuff I don't need as I go through everything. As so, I am not moving it all, it's a mad dash to try to sell everything, or worse, let me wife handle selling it. Everything I am selling, is used unless otherwise noted. The firearms may or may not be clean, and most I purchased used then threw it in the safe, never fired it personally, so they may be dirty. I will try to clean and lube before sale. Everything has been stored in my climate control gun room, with a dehumidifer. As for ammo, they have been stored in the closet of that room, in ammo cans with dissect packs. Please do not message me and ask me about what I have, that I have not listed. I am continuously posting as I go through my stuff. No trades, as I am trying to get rid of stuff, not bring more stuff in.

Price: listed below
Location: Vancouver, WA
Willing to ship at buyer's expense, buyer pays all fees. etc

All parts are used, unless otherwise stated. Anything out of the ordinary will be listed and price will reflect it. All used muzzle device have been soaking in acetone for 48hrs and may have carbon, rocksett, or loctite left over on them. WD40 has been applied to all used components as a rust preventative measure.

Suppressor Adapters:
Miscellaneous Direct Threads - $20 each
1x - Bravo Hub to 1/2x28
6x - Bravo Hub to 5/8x24
1x - Bravo Hub to M24x1.5RH

6x 5x- Dead Air Keymo / Keymicro bravo hub adapter - $150 each

4x - Griffin Armament Plan A bravo Hub Adapter Mount (short) - black nitride - $50ea

1x - Griffin Armament Plan A bravo Hub Adapter Mount (short) - heat treat - $40

Muzzle devices
1x - Griffin Armament Paladin Plan A taper mount - 1/2x28 - new in box - $70

1x - Griffin Armament Paladin Plan A taper mount - 5/8x24 - new in box - $70

1x - Griffin Armament EZ brake Plan A taper mount - 5/8x24 - new in packaging - $60

1x - Griffin Armament Paladin Plan A taper mount - 1/2x28 - used, previously pinned and welded (see photo) - $40

3x - Griffin Armament Paladin Plan A taper mount - 5/8x24 - used - $50ea

1x - Griffin Armament Minimalist Flash hider Plan A taper mount - 1/2x28 - used - $50

2x - JMAC Customs 360HD X37, M24x1.5RH to 1.375 hub external direct thread, face mount - used - $100ea

2x - Cobalt Kinetics RCB-KM keymo muzzle device - 1/2x28 - used previously pinned and welded (see photo) - $60ea

1x - Dead Air Keymo Muzzle Brake - 5/8x24 - used - $60

1x - SOLGW keymo NOX Flash hider - 1/2x28 - used, ground a little off the tip to fit suppressor, recommend if it bothers you, you can paint it with high temp paint (see photo), ground tang off set so it helps minimize tuning fork sound - $50


View attachment 2158497View attachment 2158498View attachment 2158500View attachment 2158499

Got any plan b muzzle devices?