Firstly... I think I will hold the parts for a couple of days to see if anyone wants to buy the whole shabang. If you want dibs on a part, shoot me an email claiming it, and if/when the upper doesn't sell, it'll go to you.
I built this to hunt centerfire buck in the bush with this season, but then didn't get my tag in time... and now I'd rather buy a new bike.
Shipping is $5 per shipment, combined shipping is fine. Most will cost me more than that, and you know you couldn't get it shipped for that from a dealer, so please allow me that one emotional concession.
Everything was new and unfired except the BCG, which has about 200 rounds on it, and the MI handguard, which was a takeoff. And the Micro. Keep in mind these parts are currently assembled and have kicked around my office for a few months, so they MIGHT have handling/assembly marks, but are otherwise totally new. Everything was chemically stripped and treated with FireClean, if that matters to you- no other lubricants have been used on them.
$245 - Daniel Defense 10.3" cold hammer-forged barrel - might have two very small dimples on the sides from a set-screw gas block. All gas blocks on the market will cover them (if they're even there)
$110 - PSA unmodified (incorrectly known as "M16") "Premium" (MP, 158, grade 8, etc) BCG
$40 - Vltor/BCM Mod 5 charging handle
$120 - Battlecomp 1.0, black - this shows some kick-around wear... nothing you wouldn't put on it your first trip to the range, but I'm into full disclosure. But it's unfired.
$90 - M4 receiver, bought from Bravo a few years ago- probably just their standard un-branded receiver.
$115 - MI Gen II SS handguard in the 10.0" variety - this handguard is in "good used" shape- it's got some cosmetic scratches, and it does have two slightly bent indexing lugs on the right side, but it's solid and bolts up straight and works great
$30 - ultra minimalist shaved FSB with carbine-length gas tube and tapped set-screws, and finished with a really clean HOT blue job and oil treated - Ask me for a pic. This is the single lightest, cleanest gas block money can't buy. Custom made by me.
$75 - LT751VFZ - wrench included - lightest absolute cowitness mount on the market. bubbleguming love these mounts. This one is unused except for having been mounted on this weapon.
$500 - Aimpoint T1, 2 MOA - great condition, some screwdriver goobering on the slot of the cap. Otherwise fantastic used condition (takeoff from another used rifle).
I'd sell the whole thing as-is (it's pretty much the perfect lightweight CQBR SBR upper, afterall. Seriously) for $1200, and throw in a set of black Gen II MBUS. 100% combat ready. I'm also willing to take off any part you don't need, if you have a logical offer on the rest of the upper (muzzle device, handguard, sight).
[email protected] is best.
-Ben
Pics to come
I built this to hunt centerfire buck in the bush with this season, but then didn't get my tag in time... and now I'd rather buy a new bike.
Shipping is $5 per shipment, combined shipping is fine. Most will cost me more than that, and you know you couldn't get it shipped for that from a dealer, so please allow me that one emotional concession.
Everything was new and unfired except the BCG, which has about 200 rounds on it, and the MI handguard, which was a takeoff. And the Micro. Keep in mind these parts are currently assembled and have kicked around my office for a few months, so they MIGHT have handling/assembly marks, but are otherwise totally new. Everything was chemically stripped and treated with FireClean, if that matters to you- no other lubricants have been used on them.
$245 - Daniel Defense 10.3" cold hammer-forged barrel - might have two very small dimples on the sides from a set-screw gas block. All gas blocks on the market will cover them (if they're even there)
$110 - PSA unmodified (incorrectly known as "M16") "Premium" (MP, 158, grade 8, etc) BCG
$40 - Vltor/BCM Mod 5 charging handle
$120 - Battlecomp 1.0, black - this shows some kick-around wear... nothing you wouldn't put on it your first trip to the range, but I'm into full disclosure. But it's unfired.
$90 - M4 receiver, bought from Bravo a few years ago- probably just their standard un-branded receiver.
$115 - MI Gen II SS handguard in the 10.0" variety - this handguard is in "good used" shape- it's got some cosmetic scratches, and it does have two slightly bent indexing lugs on the right side, but it's solid and bolts up straight and works great
$30 - ultra minimalist shaved FSB with carbine-length gas tube and tapped set-screws, and finished with a really clean HOT blue job and oil treated - Ask me for a pic. This is the single lightest, cleanest gas block money can't buy. Custom made by me.
$75 - LT751VFZ - wrench included - lightest absolute cowitness mount on the market. bubbleguming love these mounts. This one is unused except for having been mounted on this weapon.
$500 - Aimpoint T1, 2 MOA - great condition, some screwdriver goobering on the slot of the cap. Otherwise fantastic used condition (takeoff from another used rifle).
I'd sell the whole thing as-is (it's pretty much the perfect lightweight CQBR SBR upper, afterall. Seriously) for $1200, and throw in a set of black Gen II MBUS. 100% combat ready. I'm also willing to take off any part you don't need, if you have a logical offer on the rest of the upper (muzzle device, handguard, sight).
[email protected] is best.
-Ben
Pics to come