- Messages
- 248
- Reactions
- 25
PRICE REDUCED! MORE POSSIBLE TRADES!
Stolle Panda 6PPC LV class benchrest rifle & competition package.
The perfect turnkey package for benchrest or mid-range varmint shooters!
This rifle, originally built by <broken link removed> , is based on a <broken link removed> , right port, left bolt action. Chambered in 6PPC.
Stock is a modified H&S <broken link removed> ... paint is blue metallic with "floating skulls" on both sides of the butt.
Trigger is a Jewell 3/4 oz BR. Optic is a Leupold 36 BR, fine cross-hair mounted with Jewell rings.
There are two barrels: One is a <broken link removed> , cut rifled, 13.5 twist, fluted barrel with 1035 shots fired thru it... still very accurate with a best of .063" 5 shot group at 100 yds.
This barrel has been re-crowned and re-chambered by Speedy Gonzales and has not been fired since.
The second barrel is a brand new, cut rifled, 13.0 twist, un-fired, cryo'd Krieger.
Both barrels were fit, finished and chambered by Speedy Gonzales using the same chambering and finishing reamers... so both barrels can be used with the same cases/loads. One for practice, one for competition.
Both barrels are custom, .262" "tight neck" chambers and will not function with factory 6PPC ammunition. Both barrels have the SG&Y "spyderweb" finish. Both barrels are 416R stainless, benchrest contour barrels.
If you have no idea what I'm talking about, and/or have no interest in taking the steps necessary to hand-load benchrest quality cartridges... you should probably stay away from a gun like this.
This is a left-handed gun that has not been used since the stock was repainted and the second barrel fitted over 4 years ago.
In addition to the rifle, I have <broken link removed>, Wilson and other dies, Berger bullets, loading blocks, case measuring tools, Lapua .220 Russian cases ready for machining and fire-forming.
Sinclair hand press, New un-used barrel removal port wrench and vise, precision powder measure, cleaning stands, Dewey rods, Sinclair rod guide, Harrell compact press and neck/shoulder bump die, Sinclair neck lathe, depth gauges, wind flags and stands...so much stuff there's not enough room to list it here. Basically, a complete, turnkey benchrest outfit.
The above is a preliminary listing... going from memory. I still need to break it all out, and produce an itemized list.
Rifle, including optic and Pelican hard case: $1950 FTF in the PNW. If you've ever built a custom competition rifle, you know this is a heck of a good deal.
Complete turnkey package: $2700 FTF in the PNW. This would be the smokin' deal for someone that wanted to get into benchrest without piecing it all together... as there's easily $1500 worth of tools, equipment and supplies here. Items not restricted can be shipped direct to your address.
I also have a thousand or so Federal 205M primers and a few pounds of VihtaVouri powder. I prefer not to ship these, but will sell locally to anyone interested. I don't know exactly what I have yet, but will price accordingly once I can take an inventory.
Possible trades are: AR-15 - 223 or 308. Benelli M1 Super 90, Benelli Practical, Benelli M4, Beretta 1201FP, Walther P88, SIG P210-6, FN-FNC, FN-FAL, H&K 91, SIG AMT, match .22 pistols... combinations of above.
Thanks for lookin',
C
Stolle Panda 6PPC LV class benchrest rifle & competition package.
The perfect turnkey package for benchrest or mid-range varmint shooters!
This rifle, originally built by <broken link removed> , is based on a <broken link removed> , right port, left bolt action. Chambered in 6PPC.
Stock is a modified H&S <broken link removed> ... paint is blue metallic with "floating skulls" on both sides of the butt.
Trigger is a Jewell 3/4 oz BR. Optic is a Leupold 36 BR, fine cross-hair mounted with Jewell rings.
There are two barrels: One is a <broken link removed> , cut rifled, 13.5 twist, fluted barrel with 1035 shots fired thru it... still very accurate with a best of .063" 5 shot group at 100 yds.
This barrel has been re-crowned and re-chambered by Speedy Gonzales and has not been fired since.
The second barrel is a brand new, cut rifled, 13.0 twist, un-fired, cryo'd Krieger.
Both barrels were fit, finished and chambered by Speedy Gonzales using the same chambering and finishing reamers... so both barrels can be used with the same cases/loads. One for practice, one for competition.
Both barrels are custom, .262" "tight neck" chambers and will not function with factory 6PPC ammunition. Both barrels have the SG&Y "spyderweb" finish. Both barrels are 416R stainless, benchrest contour barrels.
If you have no idea what I'm talking about, and/or have no interest in taking the steps necessary to hand-load benchrest quality cartridges... you should probably stay away from a gun like this.
This is a left-handed gun that has not been used since the stock was repainted and the second barrel fitted over 4 years ago.
In addition to the rifle, I have <broken link removed>, Wilson and other dies, Berger bullets, loading blocks, case measuring tools, Lapua .220 Russian cases ready for machining and fire-forming.
Sinclair hand press, New un-used barrel removal port wrench and vise, precision powder measure, cleaning stands, Dewey rods, Sinclair rod guide, Harrell compact press and neck/shoulder bump die, Sinclair neck lathe, depth gauges, wind flags and stands...so much stuff there's not enough room to list it here. Basically, a complete, turnkey benchrest outfit.
The above is a preliminary listing... going from memory. I still need to break it all out, and produce an itemized list.
Rifle, including optic and Pelican hard case: $1950 FTF in the PNW. If you've ever built a custom competition rifle, you know this is a heck of a good deal.
Complete turnkey package: $2700 FTF in the PNW. This would be the smokin' deal for someone that wanted to get into benchrest without piecing it all together... as there's easily $1500 worth of tools, equipment and supplies here. Items not restricted can be shipped direct to your address.
I also have a thousand or so Federal 205M primers and a few pounds of VihtaVouri powder. I prefer not to ship these, but will sell locally to anyone interested. I don't know exactly what I have yet, but will price accordingly once I can take an inventory.
Possible trades are: AR-15 - 223 or 308. Benelli M1 Super 90, Benelli Practical, Benelli M4, Beretta 1201FP, Walther P88, SIG P210-6, FN-FNC, FN-FAL, H&K 91, SIG AMT, match .22 pistols... combinations of above.
Thanks for lookin',
C
Last Edited: