- Messages
- 2,469
- Reactions
- 2,926
- Thread Starter
- #21
Results!
I did 5 cases, I took a measurement, rotated the case some, and then took another, for a total of 4 measurements on each case.
Case 1- .0140/.0141/.0140/.0149
Case 2- .0149/.0148/.0144/.0142
Case 3- .0152/.0142/.0143/.0147
Case 4- .0144/.0151/.0151/.0145
Case 5- .0148/.0139/.0147/.0147
There is some case to case variance, but overall the numbers are pretty good, no more than a .001 difference on any case, I've read a few times that people like to see less than .002-.003, and even with a bad case here I doubt you'd get that much. for my factory rifle chamber it should be way more precise than I need, I'm happy!
I did 5 cases, I took a measurement, rotated the case some, and then took another, for a total of 4 measurements on each case.
Case 1- .0140/.0141/.0140/.0149
Case 2- .0149/.0148/.0144/.0142
Case 3- .0152/.0142/.0143/.0147
Case 4- .0144/.0151/.0151/.0145
Case 5- .0148/.0139/.0147/.0147
There is some case to case variance, but overall the numbers are pretty good, no more than a .001 difference on any case, I've read a few times that people like to see less than .002-.003, and even with a bad case here I doubt you'd get that much. for my factory rifle chamber it should be way more precise than I need, I'm happy!
Last Edited: