- Messages
- 181
- Reactions
- 99
- Ad Type
- For Sale
- For Trade
- Price
- $45
- Manufacturer
- Mossberg
- City
- Vancouver
- State
- Washington
Size: 3/8" rib width
Fits: Mossberg 500/535/900/930/935
Remington SP10
Winchester 1200/1300/1400
Like new. Mounted never fired.
Willing to sell for $45.
Willing to trade for 9mm ammunition or fullsize 9mm OEM glock magazine.
Willing to ship at my expense.
Text 425-263-0468 for quickest response.
-----------
Message from manufacturer: Meadow Creek Mounts
Low Profile Rib Clamp
These mounts come in multiple sizes, depending on the width of the rib. The mounts are slotted to aid with alignment on the rib and use a plate that clamps on the bottom side of the rib. In order to use these mounts there must be a minimum of a 0.100" gap under the rib for the bottom plate.
In order to determine which model will work on your gun if it's not listed above:
1. Determine the rib width
2. Ensure that there is a 0.100" minimum gap below the rib, and above the barrel.
3. Ensure that there is at least a 1.4" gap between the supports that hold the rib above the barrel.
This model work with any sight that uses the Trijicon RMR footprint. This includes Swampfox Optics and Holosun Optics that use the RMR style mounts.
Fits: Mossberg 500/535/900/930/935
Remington SP10
Winchester 1200/1300/1400
Like new. Mounted never fired.
Willing to sell for $45.
Willing to trade for 9mm ammunition or fullsize 9mm OEM glock magazine.
Willing to ship at my expense.
Text 425-263-0468 for quickest response.
-----------
Message from manufacturer: Meadow Creek Mounts
Low Profile Rib Clamp
These mounts come in multiple sizes, depending on the width of the rib. The mounts are slotted to aid with alignment on the rib and use a plate that clamps on the bottom side of the rib. In order to use these mounts there must be a minimum of a 0.100" gap under the rib for the bottom plate.
In order to determine which model will work on your gun if it's not listed above:
1. Determine the rib width
2. Ensure that there is a 0.100" minimum gap below the rib, and above the barrel.
3. Ensure that there is at least a 1.4" gap between the supports that hold the rib above the barrel.
This model work with any sight that uses the Trijicon RMR footprint. This includes Swampfox Optics and Holosun Optics that use the RMR style mounts.
Last Edited:
