- Messages
- 5,295
- Reactions
- 4,915
Letting this one go, its too light.
Im building a 20" Hbar upper... Billet upper, heavy bbl, 15" quad rail, bipod, big ol scope... the top/front heaviness of the rifle was silly. SO, I ordered a billet aluminum lower to make it heavier, more balanced...
That said, I have built 5 rifles and a pistol on these receivers and they are good to go.
I know, I know, its poly.... if it makes you feel better, the threaded parts are metal
AND... go look around and see if you can find any stories of THESE lowers experiencing a catastrophic failure ... or any failure due to its composition.... you wont.
Its a solid, lightweight receiver.
Okay. SO...
Here is what this comes with.
TN Arms Hybrid Receiver with the following parts installed:
take-down pins
magazine release
bolt stop
safety lever
6 position tube
A2 grip
..... I basically did all of the PITA parts
You will need
Buffer and spring
stock
FCG
Buffer Retainer and spring
$70
$60 for Supporting Member
Meet in Portland or Vancovuer
PM for shipping
Im building a 20" Hbar upper... Billet upper, heavy bbl, 15" quad rail, bipod, big ol scope... the top/front heaviness of the rifle was silly. SO, I ordered a billet aluminum lower to make it heavier, more balanced...
That said, I have built 5 rifles and a pistol on these receivers and they are good to go.
I know, I know, its poly.... if it makes you feel better, the threaded parts are metal
AND... go look around and see if you can find any stories of THESE lowers experiencing a catastrophic failure ... or any failure due to its composition.... you wont.
Its a solid, lightweight receiver.
Okay. SO...
Here is what this comes with.
TN Arms Hybrid Receiver with the following parts installed:
take-down pins
magazine release
bolt stop
safety lever
6 position tube
A2 grip
..... I basically did all of the PITA parts
You will need
Buffer and spring
stock
FCG
Buffer Retainer and spring
$70
$60 for Supporting Member
Meet in Portland or Vancovuer
PM for shipping
