WTS WA S&W 1076 + Mags and Holster

Discussion in 'Handgun Classifieds' started by Mainsail, Jan 5, 2018.

  1. Mainsail

    Mainsail
    Puget Sound
    Active Member

    Messages:
    264
    Likes Received:
    181
    Just putting out feelers to see if there's any interest.

    This is a S&W 1076 10mm pistol formerly a VA State Police gun. This gun does NOT have a magazine safety which is typical for the FBI and police guns. The 10 series Smith's are the best 10mm pistols ever made.

    I bought it about six years ago and immediately sent it off to Smith to give it a thorough checkup. They replaced springs, cleaned it up, and put new night sights on it (cost me about $350). I've put about 200 rounds through the gun without a single failure of any kind.

    It includes 15 magazines. One magazine is new in the wrapping. Ten of those have new Wolff springs, and the rest are good as well.

    Includes a leather pancake holster that makes the gun carry very well.

    Includes a Smith & Wesson box, not the original.

    Absolutely NOT interested in trades of any kind. The cash is going to another project.
    Absolutely NOT going to separate.

    Meet at my FFL in Port Orchard and you pay the fees. If you're in Or I will entertain shipping but that will be actual shipping and FFL charges (if any) added.

    The whole package is $2200. If that's too much you can sell off some of the mages, they're going for $80 or more each without new springs. Time stamp on your offer determines. If it doesn't sell locally, I'll post it nationally or put it back in the safe; the prices aren't going down.

    SW1076-1.jpg 10s02.jpg
     
    Last edited: Mar 7, 2018
    J6065, ikemay, Sharpener and 7 others like this.
  2. Patrickffbritt

    Patrickffbritt
    Beaverton, OR
    Bronze Supporter Bronze Supporter

    Messages:
    235
    Likes Received:
    149
    Lived my 1066, daily carried for 3 years. More stopping power than .357mag
     
  3. fredball

    fredball
    Vancouver, WA
    Well-Known Member

    Messages:
    5,463
    Likes Received:
    9,893
    WOW!
     
  4. Fishjager

    Fishjager
    North of Seattle
    Active Member

    Messages:
    150
    Likes Received:
    126
    I love my 1076, good luck with the sale. 14 hard to get mags, wow.
     
  5. Mainsail

    Mainsail
    Puget Sound
    Active Member

    Messages:
    264
    Likes Received:
    181
    I took a few more pictures to show the magazines, holsters, and grip sleeve.

    Mags have yellow or white followers. The pancake holster is a Don Hume and I call it the magic holster because it makes the 1076 feel light on my belt. The other is a nice Don Hume duty holster.

    Cartridges are not included.

    Last bump and if nobody is interested I will put it up on AR15.com for a couple weeks, then back in the safe. 1076FS02.jpg 1076FS03.jpg 1076FS04.jpg 1076FS05.jpg
     
    ikemay, Mistman, djharteloo and 4 others like this.
  6. Gassyman

    Gassyman
    Vancouver, WA
    Well-Known Member

    Messages:
    1,423
    Likes Received:
    709
    Try Smith and Wesson forum.......
     
  7. Mainsail

    Mainsail
    Puget Sound
    Active Member

    Messages:
    264
    Likes Received:
    181
    While digging out some other items I found one of these; new in the wrapper 10mm magazine.

    So 15 mags, one new, same price.

    SWM1076Mag.png
     
  8. mobil890

    mobil890
    Camas
    Well-Known Member

    Messages:
    290
    Likes Received:
    264
    Its missing one thing some sweet wood grips 008.JPG
     
    Medic! likes this.
  9. F-Type

    F-Type
    Enumclaw
    New Member

    Messages:
    19
    Likes Received:
    11
    I am interested, but I’m waaaaay out in Enumclaw and wouldn’t have time to head that way for a few days.
     
  10. F-Type

    F-Type
    Enumclaw
    New Member

    Messages:
    19
    Likes Received:
    11
    Those are sweet. How much?
     
  11. F-Type

    F-Type
    Enumclaw
    New Member

    Messages:
    19
    Likes Received:
    11
    Sounds good, if I can make a deal on tge 1066 I’ll hit you up.
     
  12. svxr8dr

    svxr8dr
    Vancouver, WA
    OathKeeper #004404

    Messages:
    541
    Likes Received:
    235
    Do those wood grips work with the 1076 decocker?
     
  13. Mainsail

    Mainsail
    Puget Sound
    Active Member

    Messages:
    264
    Likes Received:
    181
    Are you asking me? They are not my grips so I have no earthly notion.

    If they DO fit the 1006 or 1066, 1086, etc (with the slide mounted decocker) then they will NOT fit the 1076 or 1026 guns with the frame decocker. I believe there was someone in Turkey making wood grips for the 3rd gen Smiths, but they fatten the grip a little and I like the slimness of the stockers.
     
  14. Mainsail

    Mainsail
    Puget Sound
    Active Member

    Messages:
    264
    Likes Received:
    181
    Lots of out of state interest, but no commitment whatsoever; not that I can blame them- it's a lot of money to send to someone you don't know for a product you can't touch.

    Meet in Port Orchard at the FFL to buy, or meet in Silverdale look her over.
     
    Last edited: Mar 1, 2018
  15. SIG34

    SIG34
    Lynnwood WA
    Well-Known Member

    Messages:
    1,019
    Likes Received:
    1,774
    I had a Smith & Wesson 39 ASP in 9mm I love that gun. This is its bigger brother :s0069:
     

Share This Page