These hi intensity LED systems put the light right where you need it......inside the cage of your reloading press. Super thin, 6 LED profile (1\4" tall) attaches to the inside of the upright of your press and floods the shellplate and your cases with light. Double checking powder level before setting each bullet is an important safety step and now becomes easier than ever before. Each 12 volt light system comes with a 4 inch long, 6 LED strip, inline on\off switch and a 110 to 12v adapter. (No more fading batteries)
I have included in the light design, a metal strip that if you wish, you can bend the upper end of the light forward to shine even more light down towards the shellplate. (If your press has the required clearance with the ram all the way up.)
The LED strip comes with velcro installed on the back to attach to your press. All you gotta to do is stick it on, plug it in and get to work!
They are $29 Shipped to your door, Or $24 if purchased with another item from the website.
INLINE FABRICATION.COM
Here it is on a Hornady LNL, but also fits Dillon 550 & 650, Lee, RCBS, Etc.
Right side
Left side
I have included in the light design, a metal strip that if you wish, you can bend the upper end of the light forward to shine even more light down towards the shellplate. (If your press has the required clearance with the ram all the way up.)
The LED strip comes with velcro installed on the back to attach to your press. All you gotta to do is stick it on, plug it in and get to work!
They are $29 Shipped to your door, Or $24 if purchased with another item from the website.
INLINE FABRICATION.COM
Here it is on a Hornady LNL, but also fits Dillon 550 & 650, Lee, RCBS, Etc.
Right side
Left side